|Blog series by Shawn Sealer||updated 08-27-2011 08:41 PM||12 parts||39710 reads||26 comments total|
Part 1 of a multi-part series on my project for the 2010 Sawdust Chronicles Build Challenge.
Part 2 of the Sawdust Chronicles Build Challenge. I don’t have a jointer so I have to get an old Stanley No.7 up and running.
Part 2 of the Sawdust Chronicles Build Challenge. Getting my opened box (no Box) $150.00 planer up and running. rough milling the wood.
In this episode: Laying out and rough cutting the top. Laying out the aprons as well as scroll sawing the template. Planning the legs to final dimensions.
In this episode: Cutting the Legs to final dimension. Prepping the top for glue up. Gluing up the top. scroll sawing the new template.
In this episode: Finding a way to flatten the top. Building a large sanding block. Planer Sled Construction and putting a blade on my band saw.
In this episode:Planning and gluing up the inlay. Finishing the long sanding block.
In this episode:Laying out the legs. Cutting the slots for the Inlay. Drill out the mortises and clean out with a chisel
In this episode:Laying out the legs. Cutting for the inlay. Cutting the mortises.
In this episode:Setting the inlay. Rounding over the leg. Router plate. Carving the aprons.
In this episode:Finishing up. Routing the aprons. Carving the apron parts. Assembling the table, and finishing