LumberJocks

Ep. 20 MCCC AKG Box part 1

  • Advertise with us
Blog entry by Shawn Sealer posted 12-08-2011 02:58 PM 1481 reads 1 time favorited 5 comments Add to Favorites Watch

In this episode:
Layout and cut the box sides. Start the marquetry
WWW.MC3.edu

-- -Shawn



5 comments so far

View nobuckle's profile

nobuckle

1120 posts in 2062 days


#1 posted 12-08-2011 03:48 PM

Thanks for posting this video. I enjoyed it. My condolences concerning Bandit.

-- Doug - Make an effort to live by the slogan "We try harder"

View StumpyNubs's profile

StumpyNubs

6737 posts in 2101 days


#2 posted 12-08-2011 04:43 PM

You can use your planer as a jointer to take twists, bows or cups out of boards, expecially with shorter pieces. Just make a sled out of something flat, like MDF. Put a lip on the back end to keep the workpiece from sliding off as you feed it into the planer. Then use shims to get the board to lay flat on the sled, double sided tape will keep the shims from shifting as you run the thing through the planer.

Just a thought…

-- Subscribe to "Stumpy Nubs Woodworking Journal"- One of the crafts' most unique publications: http://www.stumpynubs.com/

View AttainableApex's profile

AttainableApex

342 posts in 2134 days


#3 posted 12-08-2011 07:43 PM

why is your tablesaw fence on the left side?
also ive done what stumpy said quite a few times and it works great, just shim it enough and it won’t move
sry bout your dog, rip

-- Ben L

View StumpyNubs's profile

StumpyNubs

6737 posts in 2101 days


#4 posted 12-09-2011 03:12 PM

Right tilt saws have the fence on the left side. It’s pretty common in smaller saws.

-- Subscribe to "Stumpy Nubs Woodworking Journal"- One of the crafts' most unique publications: http://www.stumpynubs.com/

View Shawn Sealer's profile

Shawn Sealer

168 posts in 2415 days


#5 posted 12-23-2011 10:18 PM

That’s a great idea about using the planer with shims. I will try that. The fence is on the left for the camera to have a better view. My tablesaw is left tilt. I move the fence over there only when taping

-- -Shawn

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com