Mark Kornell's Blog

  • Advertise with us
This blog is written by Mark Kornell | 47 entries so far

Latest Entry

Workbench Build #23: Wrapping it up

12-28-2014 04:14 AM by Mark Kornell | 9 comments »

(Edit: I’ve posted this as a project, too. Here.) This will be the final blog post of my bench build. There wasn’t much left to do. I finished the shaping of the chop and deadman, which mostly involved adding roundovers, fairing curves and sanding. Then I applied a coat of Waterlox: To assist with grip, it helps to add a facing of leather to the inside of the chop. Fortunately, part of the Benchcrafted package. Sized almost perfectly. Roughed up the chop face and applied the leather with a bit of contact cement later. Cut the chop pin for the Crisscross to length. Enough to recess it about 1/16” on each side. Put the deadman in place And the chop ...

Read this entry »

Older Entries

View all 47 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics