LumberJocks

Shrinking my Workshop

  • Advertise with us
Blog entry by IantheTinker posted 12-06-2018 09:33 PM 739 reads 0 times favorited 8 comments Add to Favorites Watch

A couple of years back I took over half of our basement with my workshop. I took out the bathroom that was down there, took down ceiling panels to allow for more height, and removed some piping that had gone to the toilet. This resulted in me having about an 18’x12’ space, but shaped slightly like a “T”, with one portion of the shop being more narrow than the rest. The shop served me well and I enjoyed having as much space as I did. However, I have since realized that having a second bathroom in the house would be much more convenient than a larger shop space.

I will be putting in a wall across the bottom of the “T”, dividing the sink that is down there from the rest of the basement. This will also enclose the drain pipe that was used for the toilet I took out when I first moved my shop down there (I foolishly got rid of that toilet). I chose to do it this way so that I would only have to build one wall and the size of the bathroom (about 8’x6’) will leave space for a standing shower that we might install in the future. Doing this will shrink my shop to roughly 12’x12’.

Even though my shop is shrinking, I am actually looking forward to having less space. I have a tendency to collect too many items, which leads to constant cluttering and disorganization. Having less space will force me to think more about what I buy and where I store things like tools, lumber, paints, finishes, and fasteners. I think it will also help me to focus on taking my time and turning out higher quality workpieces, as I won’t be able to work on as many things at once, as I sometimes do now.

Shrinking my shop means I will also be shrinking my table saw. I currently use a Powr-Kraft trt-3333, which I believe was made in 1957. I got it for free from my neighbor and it has served me very well. I slapped a Delta T-3 fence on it and have a maximum rip capacity of about 33”. It takes up too much floorspace in a 12’x12’ shop though, so I will be switching to a portable job site saw. Not only is the table on a job site saw smaller, but I will also be able to collapse the stand it sits on and roll the entire unit up against the wall, this will reduce the footprint to just a couple of feet.

I would also like to use more hand tools in future projects. Not only do hand tools feel nice in the hand but they also take up less space. Having a smaller shop will force me to be more choosy about what power tools I buy that take up table or bench space. I can fill in the gaps of what I can’t do with power tools with hand tools, this will both take up less room and provide me with an activity that naturally slows down the project. Which, as I said before, I need to do because I have a tendency to rush.

I am also looking forward to the challenge of organizing the shop and maximizing what little space I will have. Having challenges like this help to keep me thinking creatively and using up scraps I create during projects. So, all-in-all, shrinking my shop is a positive, even though it initially sounds like a negative. I know that some folks like to find something that works and then keep it that way for as long as possible, but I think there is value in changing things up now and again. It helps to keep the mind active and the creative juices flowing.

For those of you with hobbies, what do you do to help keep your hobby fresh and your creativity cycling in your head? Does it help to change your workspace around from-to-time?

-- opiningminnesotan.com



8 comments so far

View Ocelot's profile

Ocelot

2113 posts in 2840 days


#1 posted 12-06-2018 10:05 PM

Hmmm.

I have 28’x40’ and am still cluttered. I know what you mean. All those things I bought while thinking “I’ve got plenty of space” take up time as well as space. I’m convinced that smaller is better. I need to convert part of mine to a play area for the kids – maybe a ping-pong table etc.

I have a word document with a list of all the stuff in my shop. There are not so many things I want to give up, however. The old 6” jointer is still sitting there unused while I used the 8” jointer on the other end of the shop. Other than that, not so much.

We’ll see.

Good luck with your new shop!

-Paul

View IantheTinker's profile

IantheTinker

261 posts in 329 days


#2 posted 12-07-2018 12:12 AM

Thanks, Ocelot! Boy, having a 28X40 shop would be great for my car repairs! I would definitely fill it up with a bunch of stuff I don’t actually need though. Funny how we humans tend to collect things.

-- opiningminnesotan.com

View Dave Polaschek's profile

Dave Polaschek

2850 posts in 784 days


#3 posted 12-07-2018 01:12 AM

Good luck with the downsizing, Ian. For me, I tend to change up hobbies periodically. I’ve added wood stabilizing to my woodworking lately to have some new techniques to play with. Having fun trying to figure out exactly what I want to do with that yet.

-- Dave - Minneapolis

View IantheTinker's profile

IantheTinker

261 posts in 329 days


#4 posted 12-07-2018 01:44 AM

I don’t have the time for another hobby just now, lol. Between homeschooling, woodworking, home repairs, and car repairs I am kept pretty busy! However, I would love to get into some things like wood stabilizing somewhere down the road. I wish you the best with that, Dave.

-- opiningminnesotan.com

View Dave Polaschek's profile

Dave Polaschek

2850 posts in 784 days


#5 posted 12-07-2018 12:19 PM

Well, I’ve got some coworkers who are making knives, and they’ve said they can probably take all the stabilized knife scales I care to make. My hope is that maybe with their help I can experiment and have different woods to play with for my own woodworking.

But I get the too-busy thing. Just having kids seems to guarantee being too busy, from what I can see. Hang in there!

-- Dave - Minneapolis

View Steve's profile

Steve

753 posts in 784 days


#6 posted 12-07-2018 03:02 PM

I got excited when I saw the title and was hoping to see a list of things for sale. lol

As I sit looking at the narrow walkway I have available in my garage. haha

View IantheTinker's profile

IantheTinker

261 posts in 329 days


#7 posted 12-07-2018 06:57 PM



I got excited when I saw the title and was hoping to see a list of things for sale. lol

As I sit looking at the narrow walkway I have available in my garage. haha

- Steve

Ha! Sorry to tell you that I am not selling anything. I am going to store a few things away in my garage attack just in case I change my mind about something. I tend to do that a lot!

-- opiningminnesotan.com

View Eric's profile

Eric

70 posts in 75 days


#8 posted 12-08-2018 10:01 PM

Past shops that I have had, it seems that about every six months or so I found myself going through a reorganization of tools and peg boards as to the use of tools.

As for inspiration I am always schetching on a note pad, and lately scrolling through pages on Pinterest. Lots of ideas out there.

Have fun and enjoy.

-- Eric, Upstate South Carolina

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com