DIY Table Saw Fence

  • Advertise with us
Blog series by Hutch updated 01-02-2008 07:04 AM 2 parts 453006 reads 291 comments total

Part 1: Table Saw Fence

12-10-2007 07:21 AM by Hutch | 285 comments »

This is my old tablesaw fence. It is a little hard to see from the photo, but I cracked it trying to “micro-adjust” it. So I started to look for an aftermarket fence, of which there are some really nice ones out there. I just didn’t want to spend quite as much as they were asking because I have a previously owned Central Machinery tablesaw. I also was curious to see if I could come up with my own fence. I was worried about two things with most diy fence systems that...

Read this entry »

Part 2: Wixey Digital Guage

01-02-2008 07:04 AM by Hutch | 6 comments »

Well here are a couple of pictures of the fence with an mdf face and the Wixey Digital Guage mounted (thanks again Karson).

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics