|Blog series by Huckleberry||updated 09-26-2010 05:29 AM||7 parts||37935 reads||17 comments total|
I know this is a little out of order but I needed to get started on these desks ahead of the garbage can containers. What is great about these desks is that we will be using different kinds of joinery. We’ll be laminating the legs, pocket hole joinery for the aprons and top. Plus there will be some edge banding happening too. You will also see how I build my drawer boxes and the material that I use for this in future episodes. Don’t forget to sign up for Huck’s (hucksdi...
So here is part two of this series on making these desks. I show you how I layout my sheet goods and yes I did solve my quandary of the pencil drawer grain. So I hope that this is entertaining and educational for all.
In this episode I show you all of the ins and outs on using hardwood edge banding. I had to pick up a new trim router so once I make the new base I will show that to everyone.
As we continue on in our build we get to where we need to build the boxes for our drawers. I run through it and explain about setting up for the drawer slides.
In this episode I go over the installation of the drawer slides. It is very important to remember that the width of you drawer box is the key to a successful slide installation.
. I have this desk all ready to get lacquered and man o’ man how I love the smell of lacquer. I get all ready to start my process and begin to shoot the desk. I do this this way most of the time. I shoot a coat of lacquer sealer let it rest an hour or so and then sand with 600 grit paper. I then start my top coat, I do this step pretty much the same as the sealer. When I go back to check my work about 1/2 hour later the top has all of these bubbles in it. What the @#*^ is this??? ...
With so many types of slides out there, there are different ways in which to install them. So here is another type of slide installation. I hope this is informative for everyone.