| This blog is written by Huckleberry | 40 entries so far |
-
Sharpening Chisels
Sharpening Chisels episode introduces two ways to sharpen chisels. ; With the help of Steve from ...
-
Huck's DIY - High Gloss Finish
A guest on the show Dale Meiners shows us how to achieve a high gloss clear coated finish. This ...
-
Sandpaper Storage Cabinet #2: Sandpaper Storage Cabinet-2
We continue on with the build and get our dados sorted out.
-
Sandpaper Storage Cabinet #1: Sandpaper Storage Cabinet-1
This is a versatile little cabinet in which you can store whatever your heart desires in it. The...
-
Huck's DIY Season 2 Preview
So I am warming up this new season with dust collection issue. I go through the steps to make dus...
-
Huck is Back!!!!!
So I have been hit with a lot of emails asking where we’ve been. We took a break and re-fo...
-
Desk Build #7: Episode 13- More Drawer Slide Installations
With so many types of slides out there, there are different ways in which to install them. So her...
-
Desk Build #6: Getting the Ole' Fisheye
. I have this desk all ready to get lacquered and man o’ man how I love the smell of lacqu...
-
Desk Build #5: Installing Drawer Slides
In this episode I go over the installation of the drawer slides. It is very important to remembe...
-
Desk Build #4: Episode 10 - Drawer Box Construction
As we continue on in our build we get to where we need to build the boxes for our drawers. I run...
-
Desk Build #3: Making, glueing, and trimming the edge banding
In this episode I show you all of the ins and outs on using hardwood edge banding. I had to pick...
-
Desk Build #2: Layouts, cuts, and more.
So here is part two of this series on making these desks. I show you how I layout my sheet goods...
-
Desk Build #1: Layout & Milling Materials
I know this is a little out of order but I needed to get started on these desks ahead of the garb...
-
Candle Holder #3: The Finishing Touches
OK we are out of the clamps with our project and we level the legs. Next we do a little more fin...
-
Candle Holder #2: Episode 5 continuing on with the candle holder
We mark the holes and drill them out also cut the angles on the legs & body. And finally glu...
-
Candle Holder #1: Candle holder Construction
Thought I’d share one of my more popular projects with everyone. This is a candle holder t...
-
Hucks Quick Tips- Glue & Sawdust Fillers
I have used the glue and sawdust and made my own fillers. I read about using epoxy and sawdust a...
-
Product Review-SafeCoat
A quick little video about a new finish I stumbled upon and I truly think this is a great product...
-
Erasing Glue - Quick Tip
I show you an easy way to cope with that sinking feeling once you stain a project and then the gl...
-
Floating Shelves Episode 2 #2: Veneering the Shelf
The 2nd show in the series for floating shelves. I hope that everyone enjoys it, and I continue ...
-
Floating Shelves Episode 2 #1: Floating Shelf Construction
Ok fellow Jocks I have stumbled into the video end of wood working. This is the first episode in...
-
Kick back ouch that hurts!
I was making some small thing for a church auction right. I was cutting a piece of 10/4 walnut d...
-
Just a quick question????
As I am healing from this back deal,l and can do more, and not to mention the economy, I have bee...
-
I am back!
Well sort of, I had my back surgery and it was a little more than I bargained for, and so is the ...
-
Back to Back
About a month ago I wrote about tearing up my back. It was initially diagnosed as sciatica and n...
-
Dining Table #1: A Depressing Table
First off let say that this is going to be a tough project for me as I am not use to doing this t...
-
Our Backs
Most of you have looked at this crib that I just posted over the weekend. This thing was heavy a...
-
A crib finish
I know that I have been away for a time and fortunately it was for a good reason and that is busi...
-
Sam Maloof:1916-2009
Just found out that one of the greatest woodworkers has passed away. After reading about Sam Mal...
-
My new table saw finished
Got this saw at a steal only paid $70 for it and it worked. All I had to do was change the blade...
-
Carve Wright CNC
Hey there fellow jocks. I am looking to our vast population to see if anyone has or uses the cnc...
-
Merry Christmas from the Huckster!!!
Wanted to wish everyone a very Merry Christmas from my family to all of yours. This has been a g...
-
Shaper or router table
I was looking at my latest magazine from American Woodworker when I got to the back cover and saw...
-
My First Commission
Earlier this week I received my first commission. Or lets say it is my first job for someone tha...
-
Rocking Chair Problem
Latest and greatest project is for my sister-in-law that is due to have a baby any day now. I am...
-
Huck's Book Case
Ok here is my entry for the bookcase challenge. This piece is a complex design and I hope that I...
-
First Table Saw
Ok jocks, I am in the market for a new table saw or should I say my first table saw. I was looki...
-
Back in the Groove!
Ah Huck’s back! In the shop that is. Took the hand longer to heal that I had first hoped,...
-
Scroll Saws
Well since I have nothing but time on my hand (HAHA), I took a trip down to Woodcraft to look at ...
-
Pens for Soldiers #1: Woodcrafts making pens for our guys over seas
It’s about 9:15 Saturday morning and my wife and I a headed down to Woodcraft to turn pens ...
