|View HuckD's:||home||workshop||projects (18)||blog (29)||reviews (0)||forum topics (5)||buddies (13)||favorites (67)||activity log|
|08-11-2015 10:43 PM||
Open Segmenting - Lesson Learned - 7 replies
I’ve been working on my first open segment bowl the last few days. All was going well. I five 24 piece layers glued up using the Seg Easy plate and the Stomper. This morning I rough turned the inside of the first three layers. I just brushed in the sanding sealer on the first four layers – inside the holes is tedious, to say the ...
|11-21-2013 09:03 PM||
Seeking advice on storage shed construction. - 13 replies
Ok, I know this isn’t about the wood shop but having a 12×16 storage shed is going to get a bunch of junk out of my shop. :) The construction crew is to be here next Monday. I’ve spent this week preparing the site by digging up all the sod and cleaning up the area. The shed will be sitting on 4×8x16 concrete blocks ...
|10-07-2013 03:11 AM||
Shop made discs for PSA sandpaper - 0 replies
I’ve been working on a disc sanding setup for my lathe. Almost finished with the table. I’ve made one 12” disc from melamine (on particle bpard). I’ve ordered and received 12” PSA in 4 grits. So…I need 3 more discs. The one I made from melamine I screwed onto a large faceplate and trued it up. No probl...
|09-28-2013 01:03 AM||
Shopsmith Sanding Disc arbor hole diameter? - 5 replies
I’m kicking around the idea of building a dedicated 12” disc sander. I’ve searched here, ebay, and Shopsmith’s site and cannot find the arbor hold diameter on the Shopsmith sanding disc. Does anyone know the size?
|09-23-2013 01:24 PM||
Can I start a finish over oak and pine with regular poly to get the tinted look, then apply multible coats of water based poly for the fast re-coat times?