LumberJocks

Videos by HuckD

  • Advertise with us
Blog series by HuckD updated 12-23-2016 07:51 PM 24 parts 27515 reads 23 comments total

Part 1: Tablesaw Outfeed Extension - Stationary

11-04-2015 09:29 PM by HuckD | 0 comments »

Here’s a video of the stationary outfeed extension I added to my contractor style table saw. Watch video.

Read this entry »


Part 2: Stock support extension for left side of tablesaw

11-04-2015 09:34 PM by HuckD | 0 comments »

Here’s a video about the extension I made to support stock on the left side of my tablesaw. Easy to adjust and simple to make. Watch video.

Read this entry »


Part 3: Particle separator for my shop vac

11-04-2015 09:41 PM by HuckD | 0 comments »

I built a particle separator that used a thien baffle in 5 gallon buckets. It has a small footprint, all one vertical unit, rolls around, has onboard hose storage and works great. Watch video.

Read this entry »


Part 4: Circle cutting jig for router, with micro adjustment

11-04-2015 09:45 PM by HuckD | 0 comments »

Here’s a video about the circle cutting attachment I use on my plunge router. Micro adjustments are easy. Watch video.

Read this entry »


Part 5: Auxiliary table for drill press or workbench

11-04-2015 09:50 PM by HuckD | 0 comments »

Here’s a build video about an auxiliary table I made for my drill press. Great clamping options. I’ve also used it several times on my workbench. Watch video.

Read this entry »


Part 6: Clamping fence for box joint jig

11-04-2015 09:54 PM by HuckD | 0 comments »

I built a single blade box joint jig as designed by Mario Capellano. Here’s a build video about the clamping fence I made for it. Watch video.

Read this entry »


Part 7: Ceiling mounted camera boom

11-04-2015 09:58 PM by HuckD | 1 comment »

Here’s a build video about a camera boom I made for the shop. It can suspended from the ceiling in several locations around the shop. Watch video.

Read this entry »


Part 8: Making Wooden Knobs

11-04-2015 10:00 PM by HuckD | 0 comments »

I needed a bunch of knobs for my camera boom project. Here’s a video detailing how I make them. Watch video.

Read this entry »


Part 9: Ridgid Oscillating Sander Dust Shield

11-04-2015 10:03 PM by HuckD | 0 comments »

I made a dust shield for my Ridgid Oscillating Belt/Spindle sander. Watch video.

Read this entry »


Part 10: 12" Disk Sander for my Lathe

11-04-2015 10:05 PM by HuckD | 3 comments »

I made a disk sander setup for my lathe. Watch video.

Read this entry »


Part 11: Camera Boom Followup

11-09-2015 06:30 AM by HuckD | 1 comment »

Info on the Camera Boom I’ve been using for several weeks now. And more uses for the ceiling mount rails installed around my shop. Watch the video.

Read this entry »


Part 12: Crosscut Sled

11-11-2015 11:01 PM by HuckD | 4 comments »

Here’s my version of a Table Saw Crosscut Sled. Thanks to Kiefer and Lynn for their videos/projects which provided the inspiration for my build. https://youtu.be/eGuMqDGexxM

Read this entry »


Part 13: Circular Saw Guide - DIY

11-18-2015 11:23 PM by HuckD | 3 comments »

I made a guide for my circular saw to aid in making crosscuts in plywood. https://youtu.be/0FnKZRv_yok

Read this entry »


Part 14: Swing Bed

12-06-2015 10:34 PM by HuckD | 1 comment »

My son-in-law made this bed swing for their back porch. Made from pine dimensional lumber. Uses a twin bed size memory foam mattress. https://youtu.be/aIdde4-aNW8

Read this entry »


Part 15: Customized Paulk Workbench 2

12-14-2015 09:50 PM by HuckD | 2 comments »

Here’s a video about my version of Ron Paulk’s Workbench 2. https://youtu.be/YTM_jP5nvEo

Read this entry »


Part 16: Edge Guide for the Kreg Mini Pocket Hole Jig

01-05-2016 03:38 AM by HuckD | 0 comments »

DIY solution to using the mini Kreg pocket hole jig on 1.5” thick lumber. It’s simple and easy to build. It’s made from shop cutoffs and a little common hardware. It even makes the mini jig easier to use on 3/4 stock. Sometimes the simple things work well. https://youtu.be/mr1jDFCXHt8

Read this entry »


Part 17: Dowel Jigs 1 and 2

01-14-2016 06:37 AM by HuckD | 2 comments »

I’ve made a couple of dowel jigs to use on a table and bench project that I’m making from 2×12 Southern Yellow Pine. One is useful for joining two pieces of 2 by # lumber and the other is for 4×4 lumber. They’re very inexpensive as they are made from a scrap piece of 1” oak and some “steel spacers” from Lowes. Both have proven to be accurate and easy to use. https://youtu.be/lZRZTXYKiJE

Read this entry »


Part 18: Dowel Jig 3

01-27-2016 07:20 AM by HuckD | 0 comments »

My third dowel jig. This one for edge joining boards for table top glue ups. Simple, inexpensive and easy to make. https://youtu.be/MLMpO8BQfFk

Read this entry »


Part 19: Router Sled

02-26-2016 01:19 AM by HuckD | 0 comments »

I made a router sled to flatten a Farmhouse style dining table top I’m making. It’s a simple project that produced good results. Watch it here: https://youtu.be/ykNEqxTe23g

Read this entry »


Part 20: Farmhouse Style Table

05-21-2016 06:40 PM by HuckD | 0 comments »

Here’s a short video about a table and bench I recently built for my granddaughter: https://youtu.be/jnRA0EWkyVs

Read this entry »


Part 21: Build Highlights for the Farmhouse Style Table

05-21-2016 06:43 PM by HuckD | 0 comments »

Here are some highlights of the farmhouse table build: https://youtu.be/jnRA0EWkyVs

Read this entry »


Part 22: Garden / Shop Stool

06-01-2016 06:59 PM by HuckD | 5 comments »

A simple stool I made to help with my knee and back problems. https://youtu.be/CoE9zvhxwdA

Read this entry »


Part 23: Self Centering Dowel Jig Tips and Tricks

11-15-2016 06:25 AM by HuckD | 0 comments »

A self centering dowel jig can produce accurate and repeatable joints. Here are a few tips and tricks for getting the most from your jig. https://youtu.be/LjNA2KvqlZE

Read this entry »




DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com