Blog series by Holbs | updated 09-03-2013 12:22 AM | 2 parts | 3379 reads | 1 comment total |
Part 1: rough draft #1
what I am looking to require in my 2car garage shop: 1.) smartly spaced wood working equipment with ample room while allowing easy access for 1 car to park for auto-mechanic work.2.) consecutive in-line even-level mitre saw table, jointer table, drill press, eze lap/grinder sharpening station, planer table, router table that can be flipped up-side down out of the way when needed.2.) easy to sweep and clean.3.) little headache when it comes time to decide to seal my cement flooring....
Part 2: 98% final
and so my saga continues with my multiple flip-top work bench project. WAAAY too much geometry and trig went into this. as this is my 13th revision for this project.it may not look it, but i had to re-engineer the flip top tables. so i took everything off the wall and started over. all joints are mortise and tenon (er…um.. mostly) to give more stability and less flexing left&right since there are no supports away from the wall. i moved the 3/4” plywood to the inside...