LumberJocks

table and miter saw table #2: dry fit, nearly there

  • Advertise with us
Blog entry by Holbs posted 11-16-2014 04:47 AM 2266 reads 0 times favorited 3 comments Add to Favorites Watch
« Part 1: Table saw and miter saw mobile stand Part 2 of table and miter saw table series Part 3: accessory mount »

gots the dado’s all done.
gots the blade storage all done.
have the cavities for future shelves, all done.
tomorrow, will flush the table saw to the miter saw, fine tune the dust collection system, and glue up.
FYI: the miter saw is flipped upside down with the 2 4’ outfeed tables from my planer/jointer stand in place during dry fittings.

-- Yes, my profile picture is of a Carpenter Bee! The name is derived from the Ancient Greek "wood-cutter"



3 comments so far

View JoeinGa's profile

JoeinGa

7487 posts in 1474 days


#1 posted 11-16-2014 01:11 PM

Ah Ha! What’s that old song line? “I can see clearly now…”

In the first post of this blog, I didn’t even SEE the miter saw behind the table saw. I thought the frame behind the table saw was going to be an off-feed table . And I thought you were going to put the miter saw NEXT TO the table saw! I could not imagine that you had enough room to squeeze it in that little area to the right of the table saw.
Now that I see it is actually PART OF the off-feed / flip-top it looks like it’s going to work just fine!

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View Holbs's profile

Holbs

1379 posts in 1496 days


#2 posted 11-16-2014 03:28 PM

once i wake up a bit.. i’ll snap length-wise picture. i usually don’t snap multiple picture per blog session, as it’s just a blog :) multiples would be in finale. i will admit, i was torn at far end outfeed table for miter saw. i have no left side support table for the miter saw. i have left the option open for the same assembly i made from the planer/jointer combo project.

-- Yes, my profile picture is of a Carpenter Bee! The name is derived from the Ancient Greek "wood-cutter"

View JoeinGa's profile

JoeinGa

7487 posts in 1474 days


#3 posted 11-16-2014 03:45 PM

Yeah, at first glance I thought you were going to put the miter saw on the RIGHT side of the table saw. I didn’t realize your table saw had a pull-out on the right side. That’s why I wondered how in the world is he going to fit a miter saw on that little shelf (to the right) of the table saw?

-- Perform A Random Act Of Kindness Today ... Pay It Forward

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com