HokieKen's Blog

  • Advertise with us
This blog is written by HokieKen | 33 entries so far

Latest Entry

Bow Saw Build #2: Cuttin' and Fittin'

08-25-2017 12:42 PM by HokieKen | 6 comments »

I did most of this before I started taking pictures so the pics are a little sparse. But, I think the process is fairly easy to follow. First thing I did was to make my two 5/8×1/4 mortises in the vertical frame pieces. I hogged the bulk out on the drill press then cleaned them up with a chisel. The mortises are 3/8” deep… (this will be important later!) On a side note, I’ve been using the hell out of my Gramercy holdfasts on my new bench. I don’t know how I ever lived without these things! Next, I cut out the template of the vertical piece from the Gramercy drawings and put it on one of the parts with spray adhesive. I made DARNED sure I car...

Read this entry »

Older Entries

View all 33 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics