LumberJocks

Hix's Favorites

  • Advertise with us
View degoose's profile

End Grain Cutting Board LJ Class 006 #5: Finally....

06-04-2011 11:19 AM by degoose | 18 comments »

Finally I have made some progress on the first lesson…enough said… watch the video........The finished component pieces ….shown at the end of the vid dry fitted.. [note that there are no gaps.. this will make for a good glue up..] have the following dimensions: Outer… 65mm wide and 40 mm wide [2 5/8 in and 1 5/8 in]2 Inner… 65 mm wide [2 5/8 in]Centre .. 65 mm wide [2 5/8 in]All pieces are dressed to 45 mm thickness [1 3/4 inch]My timber selections were Golden...

Read this entry »


View Andy's profile

"Palm Box" tutorial

12-08-2010 07:30 AM by Andy | 88 comments »

I am very sorry that the tutorial is still down. I lost all the pictures and just have moved on to other things. But the good news is that others have come to the rescue with their own tutorials and are just as good…even better than mine.Here is one by Scott http://lumberjocks.com/projects/58221Andy

Read this entry »


View Jordan's profile

The great Lumberjocks shoe challenge #1: Introduction

09-22-2010 01:57 AM by Jordan | 72 comments »

As a former grade school and dance teacher, I think I was cut out for motivating people to recognize their strengths. And as a carver who lives on his own creations, I have had to motivate and challenge myself on a daily basis. Over the years, I have developed my skills by recreating everyday objects – in my case, shoes. Shoes and boots of every kind – skates, cowboy boots, winter boots, running shoes…and the list goes on. (in real life I also have a shoe fetish.) I carved e...

Read this entry »


View scrappy's profile

Grain Matching Corners on a Box #1: How Many Can You do?

11-12-2009 04:11 AM by scrappy | 11 comments »

I have been doing some thinking about Grain Matching corners. We all see boxes that the wood has been wraped around to match 3 corners, but the 4th is allways off. I think I have come up with a way to match all 4 sides. I will be making a box when I can get back in the shop.(hurt my shoulder and LOML won’t let me play until next week) Will take step by step pics and post in this series for everyone. Keep an eye open for updates. If anyone else has a process for this, feel free ...

Read this entry »


View thewoodwhisperer's profile

Oh For Keepsake!

10-30-2009 06:22 PM by thewoodwhisperer | 32 comments »

Its that time of year again: HOLIDAY PROJECT TIME! So this year, I decided to make a few little keepsake boxes, thanks to some advice from The Great WOODini. I also took inspiration from a box Nicole keeps on her nightstand and developed a new design that is much more practical for the average woodworker to make. The boxes feature a secret locking pin. Once removed, the lid slides off on a sliding dovetail. And as always with these holiday gift projects, you can modify them by trying diffe...

Read this entry »


View littlecope's profile

Shaped Wooden Hinges #2: The Cutting

10-15-2009 02:39 PM by littlecope | 12 comments »

Yesterday the first installment ended with all the holes having been drilled for the two pairs of hingesIt’s all Scroll Saw work from here! I took a few minutes first to police the area though. It had gotten a little out of hand, even for me!!The work begins with slicing off the waste area which exposes the side drilling.Next is the beginning of the shaping. Side cuts first. These are a bear to cut!! Scroll Saws are not Chop Saws! They’ll do this sort of cutting, through about 1 1...

Read this entry »


View poroskywood's profile

Drunken Cutting Boards #1: Drunken Alice in Wonderland Cutting Board

09-10-2009 03:22 AM by poroskywood | 41 comments »

Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes… So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...

Read this entry »


View NY_Rocking_Chairs's profile

Hal Taylor Rocking Chair #8: Week 6 - Back Braces and Head Rest

06-12-2009 08:22 PM by NY_Rocking_Chairs | 2 comments »

Welcome again to another edition of Hal Taylor Rocking Chair building… After attaching the arms and shaping their joints I flip the chair over and sand out the leg-seat joints on the bottom. This way even when the customer flips the chair over or is laying on the floor looking up at the bottom of their chair, everything looks spectacular. I keep some 1” thick styrofoam pads that I can put work on without worrying about scratching or marring it on my work surface… D...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase