LumberJocks

HillbillyShooter's Woodworking Reviews

  • Advertise with us
View HillbillyShooter's:homeworkshopprojects (19)blog (4)reviews (4)forum topics (5)buddies (101)favorites (353)activity logWatch
Grip Tite Guide/Magnetic Featherboard

Grip Tite Guide/Magnetic Featherboard

10-05-2014 10:50 PM by HillbillyShooter | 9 comments »

Earlier, I posted my Auxiliary TS/Router Fence and Feather Board Rail system ( http://lumberjocks.com/projects/106533 ), but it doesn’t do anything for my joiner. So, I purchased the Grip Tite Guide, which has a magnetic base, to try with some thin strips of 5/16” White Oak molding I cut with my Magic Molder and trimmed to size, leaving a rough bottom. These actually work very well and permit use both vertically on the joiner beds and horizontally on the joiner fence. Two are required, o...

Read this review »


Magic Molder—A Safe and Professional Molder Head System

Magic Molder—A Safe and Professional Molder Head System

09-15-2014 03:46 AM by HillbillyShooter | 23 comments »

The Magic Molder System consists of a molder head and cutter plugs. Although not inexpensive, Magic Molder constitutes a truly safe and professional system for using your table saw (or radial arm saw if so inclined) as a shaper for cutting molding profiles. There are three primary features that make this system head and shoulders above the previous molder head I acquired 30 plus years ago—one I’ll humorously describe as a “cubby, Ninja star.” First, the Magic Molder is the safest des...

Read this review »


Actually Does Remove Rust Stain

Actually Does Remove Rust Stain

11-10-2013 07:54 PM by HillbillyShooter | 24 comments »

Some time ago, and without going into details, water got onto the out-feed table of my PowerMatic 60 long bed jointer. I use TopCote (now made by Bostik) on a regular basis to protect my tool tops, but it didn’t help prevent the rust or remove it. I was able to get the “red” rust off with steel wool and Boeshield T-9 Rust and Corrosion Protection. However, a black/gray stain remained which I couldn’t get off. This stain is shown in the second picture above. Recently I learned about a ...

Read this review »


No More Sucking Through a Straw

No More Sucking Through a Straw

08-27-2013 10:08 PM by HillbillyShooter | 16 comments »

This is a product I’ve been meaning to share for some time. I discovered it back in 2011 after I quit smoking and promptly developed some breathing problems. I tried various paper masks but always felt like I was trying to “suck air through a straw.” I looked at other, bulky masks but passed as being overly restrictive. Finally, I found the “Dust Bee Gone” mask and ordered one. My experience has been great with the breath ability through the material of the mask and the filtering quality...

Read this review »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase