LumberJocks

Trestle Table #19: Multi-use RIP Fence JIG

  • Advertise with us
Blog entry by HappyHowie posted 10-20-2016 12:45 AM 858 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 18: Through Mortises in Leg Part 19 of Trestle Table series Part 20: More Work on Leg Assemblies »

Although I referenced Boy Van Dyke’s Fine Woodworking Magazine article about his multi-use RIP fence jig in a prior blog post, I thought I should include more photos showing the melamine fence that I bolt to the RIP fence jig in order to cut my tenons on my Saw Stop table saw. I made two versions of this melamine fence; one is the height specified in the magazine’s article. The other fence is two inches taller than the magazine’s article.

I also implemented Bob’s tenoning jig that slides along the melamine fence. I smeared the fence and the jig with paste wax so it moves smoothly over the fence.

A close up view of the tenoning jig that slides along the top of the melamine fence.

I used glue and screws to fasten this lip to the tenoning jig. I believe Bob Van Dyke used simply a tongue joint with glue.

-- --- Happy Howie



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com