LumberJocks

HappyHowie's Blog

  • Advertise with us
This blog is written by HappyHowie | 200 entries so far

Latest Entry

Roll Around Tool Cabinet #28: Jeez Louise, Did I Measure That Wrong?

03-18-2017 08:18 PM by HappyHowie | 21 comments »

I determined I needed a better spacer jig from what I started with in order to mount these drawer slides. So I went back to my big box store and bought two 3/4 by 24 by 48 inch small, easy to handle panels of MDF. I cross-cut both of their lengths to the 31 9/16 inches. This is the length I needed in order to mount my top-most 3 inch tall drawer. Then I ripped their widths. This dimension was calculated so with the panels pushed back against the back frame and panel its front edge would be the exact location where I will position the front edge of my metal drawer slides. This edge gives me the correct flush fit for all of my seven stacked drawers in this cabinet bay. With t...

Read this entry »

Older Entries

View all 200 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com