Ok, got time and money together and added the router station part to my table. Used the Lee Valley Base plate. Had to borrow time on a drill press to add the holes, funny part, after putting the holes in perfectly. managed to drop the plate, put a chip in it. Small one, but drives me nuts… Hid it towards the rear. Also bought a Lee Valley T slot bit. Very happy with how the top turned out.. Simple and stable. The fence right now is basic. Going to add a better face later and dust collection. At some point going to add the doors and slide drawers, but again time and money,, rarely do I have them together….
|This blog is written by Hamelin309 | 4 entries so far|
So during this holiday I have put some time into building my workbench. Got the walls put toge...
Well I was able to start working on the bench. There was a generous donation of a 2×10. Wh...
So I have a CAD drawing of my planned workbench… It’s 2D and I will post the rough...