LumberJocks

Hallmark's Favorites

  • Advertise with us
View rance's profile

Disposable KerfMaker

06-14-2011 08:35 AM by rance | 31 comments »

Well, yes, the Kerf Maker is a very clever jig. I have a different take on its manufacture. I see a reason to have several, NO, Wait… Why not make them DISPOSABLE? :) I had a need to use one today so why not make one. Here it is:  I used a stick of about 1/2” square pine. Yeah, Pine(or is that Poplar?). And some double sided tape. Cut the stick in half. (I’m kinda protective of my tape. Can ya tell?)  Then stick both halves together with the tape. &n...

Read this entry »


View shipwright's profile

Easy. Elegant Wooden Box Hinge #1: I could kick myself

06-23-2011 07:26 AM by shipwright | 58 comments »

A few months ago I spent many many hours trying to perfectly align a set of “box joint hinges” for my project ” A Little Cabinetree” After I finally got them working I installed them on the edges of the MDF sides and doors and then veneered over the whole works. The only good part was that there were enough left over prototype parts that I could make a hinge for my next project from the cast-offs Then this week I was making a tea box for a friend and when...

Read this entry »


View David's profile

Furniture Design #1: Fibonacci gauge

08-05-2007 02:00 AM by David | 32 comments »

1 • 1 • 2 • 3 • 5 • 8 • 13 • 21 • 34 – The Fibonacci Sequence I have been fascinated with The Fibonacci Sequence and The Golden Rectangle for some time. I finally got around to building a Fibonacci Gauge that was featured in WOOD Magazine. The guage maintains a consatnt proportion of 1:1.618 between the points. It is used to help determine visually appealing proportional dimensions. I am looking forward to using the guage in future projects. Follow the text below for so...

Read this entry »


View Rembo's profile

making curved doors #1: making curved doors

11-17-2011 08:42 AM by Rembo | 9 comments »

Read this entry »


View Loogie's profile

Building a new workbench #1: The top is glued up and the components are rough cut

01-29-2009 10:28 PM by Loogie | 9 comments »

I’m in the process of building a new workbench based on Bob Lang's bench as detailed in the October 2008 issue of Popular Woodworking. I’ve read Christopher Schwarz book “Workbenches: From Design And Theory To Construction And Use” as well as several others. It always seemed like I wanted a combination of the features I found in most other benches. Bob Langs design was the first I’d seen that incorporated everything I wanted in a bench, so here goes! I bou...

Read this entry »


View GaryK's profile

How to post pictures in your blogs or forums 101

05-25-2009 08:15 PM by GaryK | 33 comments »

I have been asked by a couple of people how I add pictures into my blogs so I thought that I would make a little blog on how I do it. This is what works for me and not the only way to do it. First you have to have your pictures in your computer. You can download then from your camera or scan them with a scanner or whatever method you want. I like to resize the pictures in advance. The maximum width picture that you can display in a blog is 640. I don’t know what the limit for the ...

Read this entry »


View thewoodwhisperer's profile

Router-Based Inlay

04-03-2010 01:50 AM by thewoodwhisperer | 23 comments »

Inlay is a great way to adorn your woodworking projects. Even the simplest item can become incredibly compelling if it features a well-executed inlay. With the right materials and techniques, its just like painting with wood. Only “non-artistic” folks like myself can actually do it! If you are in the N. California are, be sure to take one of David Marks' marquetry and inlay classes. And below are a few items that I recommend using for this process: 1/16 Inch Router Bi...

Read this entry »


View Dennis Zongker's profile

"Carving Acanthus Leaves into, Lathed Fluted Columns"

04-01-2010 03:44 PM by Dennis Zongker | 37 comments »

There are 8 fluted columns to this bedroom set. The columns were turned on our “Legacy” Ornamental Milling Machine, by one of our shop craftsman, Dennis Nygard. I’m carving the 64 acanthus leaf’s by hand with “Pfeil” carving knifes and a small brass mallet. It’s easer to cut the solid cherry by lightly taping with a small mallet. Each leaf takes about 3 hours per leaf. Plus set up time and drawing time, which takes about 2 hours. So, each spindl...

Read this entry »


View thewoodwhisperer's profile

The Other John Hall Frames

09-11-2009 08:30 PM by thewoodwhisperer | 5 comments »

One of my favorite projects ever to come out of my shop is the John Hall Frame reproduction (mine is on the left and the original is on the right). Just as a quick refresher, John Hall was one of the famous Hall Brothers who were responsible for the construction of many of the best known Greene & Greene creations. Now many of you may remember that I was attending a week-long class being taught by Darrell Peart at the William Ng School when I had an opportunity to handle, trace, and me...

Read this entry »


View ChicoWoodnut's profile

Greene inspired Night Stand #1: Time to start the execution phase

12-24-2007 07:31 PM by ChicoWoodnut | 6 comments »

Well I think I am finally done with the design of this piece. I made a change last night which is actually a regression to an earlier model. I like this change. I have reversed the rails and stiles on the door construction making the stiles be the horizontal member. I read an entry on this site the other day regarding this technique. Sorry I can’t remember who to credit it to. Anyway, Here are two jpeg exports to compare. I think the new arrangement gives the table a low and wide...

Read this entry »


1 2 3 next »
22 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase