The table will be primarily Zebrawood with Padauk for the sculpted rails. The top is going to be Zebrawood and will be approximately 38×80”.
I laminated 4 pieces of Zebrawood for each leg so I could start with 3×3x29 blanks. I added an aditional piece of Padauk at the base of each leg for a little extra color accent.
I then used a 3/4” dovetail bit on each leg to accept the rails and then cut the curves on the bandsaw.
-- Every step of any project should be considered your masterpiece if you want the finished product to reflect the quality of your work. http://www.FineArtBoxes.com