GoPhillies's Blog

  • Advertise with us
This blog is written by GoPhillies | 1 entry so far

Latest Entry

"Neat" Hinge Install

01-10-2012 11:14 PM by GoPhillies | 4 comments »

I had a couple people ask about a step-by-step of the hinge installation on my recent project post LumberJocks. I have never done a blog post before so bear with me. You need 4 things to install these hinges and all are in this picture: router table with 5/16 bit, 1 1/4” reference piece, stop block and a clamp. Align the face of the router table so that the bit will cut down the middle of your box sides Then, use the the 1 1/4” reference piece to set the stop block the correct distance from the edge of the bit. Ian’s directions call for 31.5mm bit here is the States I had to convert it. Set the depth of the bit bit to cut the mortise the exact thi...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics