Kerf Maker Box Joints

  • Advertise with us
Blog series by George_SA updated 03-13-2018 06:39 AM 2 parts 708 reads 1 comment total

Part 1: Easy Box Joints - How To

02-12-2018 03:12 PM by George_SA | 1 comment »

EDIT 13 Mar 2018Part 2 explains it more clearly and works for even spaced and uneven spaced fingers. While thinking about making a joint that is similar to making Box Joints, I came up with the idea to use my 5 Minute Kerf maker and Small Sled to make Box Joints. It works like thisYou use a stop block and spacers and the Kerf Maker on the sled to cut the Box Joint Fingers. The 1st step is to align everything for the 1st cut. I switched the spacers and the Kerf Maker around to save...

Read this entry »

Part 2: Making uneven Box Joints

03-13-2018 06:39 AM by George_SA | 0 comments »

With my 5 Minute Kerf maker, I can make custom sized box joint fingers. This tutorial is mainly for me to remind me in the future how this works :) Here are a few diagrams and pictures that explain the how to. EDIT 13 Mar 2018Diagrams at the end explain how to when there are more than 3 fingers. Important to take note of the Kerf Maker orientation and also that the fingers that are cut will be the reverse image of the spacers on the sled. Never mix up the sequence of the spacers. ...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics