LumberJocks

George_SA's Blog

  • Advertise with us
This blog is written by George_SA | 15 entries so far

Latest Entry

How I solved the problem of centering a drillbit in an existing hole

12-19-2012 10:21 AM by George_SA | 9 comments »

Usually when I want to countersink a larger hole in a smaller hole I use a Forstner bit to drill the larger hole first. The Forstner tip leaves a nice little center hole which enables me to accurately drill the smaller hole all the way through. Sometimes I get overeager and forget to drill the larger countersink hole first. One is then faced with the problem of centering the Forstner bit on a hole. Not so easy! This happened again the other day and thinking about the problem for a while, I came up with the following solution. Put a dowel in the hole after marking the center on the dowel. After drilling the countersink hole, just remove the dowel.

Read this entry »

Older Entries

View all 15 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase