LumberJocks

GeneR's Blog

  • Advertise with us
This blog is written by GeneR | 2 entries so far

Latest Entry

Education and torment #2: Red Oak Sandpaper Storage cabinet

97 days ago by GeneR | 3 comments »

This cabinet is made from leftover red oak, Luan, birch plywood and plexiglass that I had in my shop. It is approximately 17”T x 7 1/2”W x 6” deep. I would have liked to make it a little taller to handle a couple more shelves and slightly deeper to have been able to recess the back panel. The Box I first sent the oak through the joiner to ensure I had 1 flat square edge. I then cut the board to the proper widths on my table saw then to final lengths on the Miter saw. The lengths were close but no exact as this was going to be a shop storage cabinet with no specific location to fit in. Once the sides were cut to length I used the Rockler box joint jig with...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase