LumberJocks

Adjustable Sticking Board

  • Advertise with us
Blog entry by GMatheson posted 05-08-2013 08:39 PM 1469 reads 0 times favorited 1 comment Add to Favorites Watch

Over the last week I have made two quick sticking boards to be able to plane grooves in small boards. The first one was just a small one for my marking gauge project. Then when I was working on the cover for my Stanley 45 box I needed to make more grooves and the first little sticking board was too short so I made another quick and easy one so I could make my grooves.

Since I eventually will be making my own moldings (as soon as I clean up and sharpen my molding planes) I figured I should make a sticking board that will be useful for that job too. This is just a simple project but it should be useful for a while.

I used an old pine board for the base and a piece of poplar for the fence. I cut some grooves in the base and used some bolts with wing nuts to make the fence adjustable. A row of screws at the end o the jig keep everything from falling on the floor when planing. With this jig I can now work with boards up to 48” long and up to 4” wide.

-- Greg in Ontario, Canada



1 comment so far

View widdle's profile

widdle

1467 posts in 1720 days


#1 posted 05-09-2013 12:15 AM

Looks good..How does it work ?..Sorry im a bit slow…

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase