LumberJocks

Firewood20's Favorites

  • Advertise with us
New Plastic Dust Deputy Arrests Dust

New Plastic Dust Deputy Arrests Dust

08-06-2009 03:18 PM by TheDane | 15 comments »

The demo at AWFS and videos online were just too convincing … I ordered the new Oneida Dust Deputy kit ($99.00 plus $10.50 S&H). It was money well spent. The ‘kit’ comes with the plastic cyclone, two buckets, lid, hardware and hoses. The cone itself is a tough, heavy plastic, and the hose connections are tapered so my ShopVac hoses fit tight and stay put. Assembly took under 5 minutes. Instead of a copper wire and washer recommended by the manufacturer for static disc...

Read this review »


Inexpensive great task light

Inexpensive great task light

02-28-2014 02:11 AM by EBpenguy | 7 comments »

I went to the recent Woodworking Show in Somerset, NJ and saw a really nice, goose necked LED task light at one of the booths. It was pretty slick, but almost $70 to buy. I had already overspent my budget and was not happy to pass on this! I told one of my woodturning buddies about it and he suggested I look instead at a similar light he had used from IKEA for $9.99. And I am glad I listened to him. IKEA sells this as the Jansjo desk lamp number 201.696.58 in black. It also comes in white...

Read this review »


Heavy Duty wheel casters

Heavy Duty wheel casters

04-25-2009 05:49 AM by Don K. | 8 comments »

Like many, I make mobile base’s for all of my shop equipment. I have used plastic, rubber metal etc. And while they serve their purpose, they have many short falls. The plastic and metal ones hang up on every chip of wood and piece of trash on your floor, and have terrible locking systems. The rubber ones while they do roll much easier across the floor, still have the same lousy locking system, and develop flat spots when they sit for a extended time. Recently while I was at my ...

Read this review »


Simple Green PRO HD excells at cleaning saw blades

Simple Green PRO HD excells at cleaning saw blades

12-06-2010 09:46 PM by pintodeluxe | 16 comments »

I heard that soaking carbide tipped blades in simple green can leach carbide from the metal. I emailed simple green and a rep confirmed that the standard simple green should not be used to soak carbide tipped blades. He recommended two other simple green products that have no such problem: 1. Simple Green Pro HD 2. Simple Green Aircraft parts cleaner I found the simple green Pro HD at my local Home Depot. It is the purple stuff and is sold in a 1 gallon concentrate for around $13. I...

Read this review »


Harbor Freight Mobile Base with instructions

Harbor Freight Mobile Base with instructions

02-25-2012 05:02 AM by justholler | 10 comments »

As with many of the other posts on this item, the instructions were a sticking point. I found out just what that meant and this assembly took waaaaayyyy too long! Fortunately I was building it for a small Grizzly band saw so I used pine instead of hardwood. Had I used stock that was in short supply, I would have been further frustrated. The main issue is the instructions say nothing about where the wood pieces should stop in the frame. Once you start without the experience, you will be...

Read this review »


Harbor Freight #95288 - If u don't weld - bolt it!

Harbor Freight #95288 - If u don't weld - bolt it!

04-11-2012 01:04 PM by curliejones | 4 comments »

I commented favorably on the “Rock Solid” review after my 1st assembly using SYP runners for a lightweight (100 lb) planer. I wanted to graduate to my 220 lb tools and felt the other favorable comments for this base warranted a “go”. I priced hardwood, but only furniture quality was available that was dried and cost prohibitive for me. One of our fellow LJs used square steel and welded it up, so I decided to price square galvanized tubing found locally and was amazed ...

Read this review »


Porter Cable Air Compressor

Porter Cable Air Compressor

03-05-2009 12:58 AM by JayDee | 10 comments »

I replaced my old Husky air compressor with the one shown. This model is much quieter with twice the horse power. It is a two stage, oil free compressor with a 25 gal. tank. I find the whole unit is built much better than the Husky I had. I brlieve it was worth the extra money. I also ran about 60 lin. ft. of hard air lines with three drops. Each drop has a petcock to release condensation build-up and a quick disconnect. The air lines cost me about $200.00 in materials and about 7 hours labor...

Read this review »


Easy on the fingers.

Easy on the fingers.

10-25-2011 01:45 AM by SchotterWoodworking | 5 comments »

I’ve seen these little jobs hanging around the spray paint for a while now and I’ve been dying to give one a try. I went for the RustOleum brand as opposed to the generic one next to it. (about a $2 difference) I am very happy to say, after painting a wheelbarrow, a 55 gallon drum, a planter box and 6 Halloween decorations, my fingertip did not have the traditional ache that comes with using spray paint all weekend. It is well balanced and very comfortable to use for long periods ...

Read this review »


This is The ONLY Construction Aheasive to Use

This is The ONLY Construction Aheasive to Use

07-28-2012 03:11 AM by Eric M. Saperstein | 7 comments »

I’m going to keep this VERY simple … I strayed from this product today and regret it already. Ignore all other construction adhesives. PL Ploy is the one to use. It cures in 24 hours as long as the temperature and humidity are within a normal day. It’s much faster in the summer with high humidity and it’s slower in the winter when its cold and dry. This can be adjusted by adding some moisture to the mix (spray a wood surface lightly … before applying) We...

Read this review »


Major help for garage spray booth

Major help for garage spray booth

12-20-2012 05:36 AM by wwbob | 6 comments »

My garage is my workshop. It is also my spray room. Each time I spray, I need to drape sections of the garage with some form of plastic. I had just about given up spraying due to the hassle dealing with the 9×12 plastic sheets, then I discovered 3M Advanced Masking Film. The film comes in a roll about 12.5 inches tall. You tape the film up without unfolding it. Once the 12.5 inch wide film is taped up, you pull down on the back of the film and the it unfolds to a full 99 inches. I...

Read this review »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase