LumberJocks

Fchilly's Blog

  • Advertise with us
This blog is written by Fchilly | 4 entries so far

Latest Entry

Ukulele #3: Back and neck install

12-07-2018 09:58 AM by Fchilly | 2 comments »

I sanded the uke and laid out the bridge location and installed it. This was very easy with the fretboard already glued in place, and the back not installed yet. After shaping the braces and prepping the neck joint i was able to move on to final installation of the remaining components. Before glueing the neck or back, I set my router a tad shallow and cut clearance for the back’s binding just in the area my router wouldnt reach later rightnear the neck. I glued the neck into place and let sit overnight. After the glue cured I cleaned up all squeeze out and sanded all interior surfaces that would soon be inaccesible. Next step was to glue on the back. Prior to glueing I masked...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com