Greene and Greene inspired raised dog tray #7: Attaching the breadboard ends and plugging all the pinned mortises/breadboard screws
Took me a while to get back to this project. It’s been a hectic past few months. All that was remaining was plugging all the pinned mortises, attaching the breadboard ends, and plugging those screws as well. Plugging the legs—————————-Plugging the pinned mortises was a real pain in the ass. I wish I had a mortiser as they would have all been identical in size. Instead, I had to custom fit every single plug. I used a 1/2” chisel to square the holes, but most weren’t perfectly square or exactly 1/2”. So to start I cut some left over scrap hard maple a bit larger to 5/8” for plugging the legs.The...
