LumberJocks

Jet table saw blade degree adjustment

  • Advertise with us
Blog entry by ElmoSr posted 1449 days ago 976 reads 0 times favorited 4 comments Add to Favorites Watch

I have a jet 10” contractor table saw and it doesnt come to a full 90* angle and i have looked all over the saw for an adjustment except in the correct place ,manual cant be found. does anyone know where/how to adjust the blade to alter the degrees??

Thanks

-- ElmoSr,Ga. Life is Hard by the Yard,,,But a Cinch by the Inch



4 comments so far

View Swede's profile

Swede

190 posts in 1614 days


#1 posted 1449 days ago

Try going to there website you may be able to download a manual.

-- Swede -- time to make some sawdust

View Kerry Drake's profile

Kerry Drake

163 posts in 1616 days


#2 posted 1449 days ago

There should be 2 adjustment stops (screws or bolts) under the saw up in the trunnion. One to set the 90 degree and one to set the 45 degree. If it is not in the manual, you should call Jet and they should be able to help you.

-- Kerry Drake, Loudon NH, http://thenickedfinger.wordpress.com/

View ElmoSr's profile

ElmoSr

240 posts in 1622 days


#3 posted 1449 days ago

Thanks Swede, I found a manual online and it shows adjustment screws on top, but mine doesnt have those. I will check under he saw Kerry

-- ElmoSr,Ga. Life is Hard by the Yard,,,But a Cinch by the Inch

View PCorl's profile

PCorl

49 posts in 1975 days


#4 posted 1448 days ago

What model saw is it?
Paul

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase