LumberJocks

Benchtop Bench & Vise #6: Wide Stretchers & Completed Base

  • Advertise with us
Blog entry by EdsCustomWoodCrafts posted 01-12-2018 10:46 PM 551 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 5: The Risers Part 6 of Benchtop Bench & Vise series Part 7: Vise Components »

These 2 stretchers attach the left and right side of the bench and again I used a pieces of 2×4. Put a tennon on the left and right sides of the stretcher and then measured from the outside face of the risers to a convenient place to attach the the wash and nut in the middle of the stretcher by drill a 1 3/8” hole on the left and right side of the component thus being able to drawer everything tight with a wrench…

Pictures explain this better than I can right the direction so here it is

Below you can see the base complete in its entirety

Next is making and attaching the vise jaws and then finally the top

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown”



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com