LumberJocks

Router Cabinet Redo #8: Adding 3" Rotating and Lockable Casters

  • Advertise with us
Blog entry by EdsCustomWoodCrafts posted 03-02-2017 05:56 PM 632 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 7: Adding a plywood plate to attach My router table Part 8 of Router Cabinet Redo series Part 9: Drawers & Hardware »

When I realized that the casters were not clearing the cabinet I had to add more depth to the base by gluing and screwing for pieces of plywood into the corners where the caster are being placed ..

All that was left was for pre drilling the holes for the bolts used to secure the casters and add washers and nuts..

What I was not happy about was that when drilling the holes I neglected to add a piece of wood to the base to keep tearout to a minimum .. but since I didn’t the tearout was bad.. but my saving grace is that my cabinet doors will hide it…

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown”



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com