LumberJocks

Router Cabinet Redo #3: Base & shelf

  • Advertise with us
Blog entry by EdsCustomWoodCrafts posted 02-28-2017 06:02 PM 863 reads 0 times favorited 2 comments Add to Favorites Watch
« Part 2: Cabinet Walls & Back Part 3 of Router Cabinet Redo series Part 4: Cabinet Base & Shelf »

The base is basically a piece of 3/4” poplar plywood with a solid oak edge band that is secured with pocket hole screws and glue.

I machined a 3/4” dado 1” up from the bottom of the left, right and back sides and the base just slides in.

Before assembly I still need to position the 4 locking casters and glue and screw the the base and shelf into place.

The upper shelf is the exactly the same piece as the base except I placed to dado 6” from each side to position the upper partition panels that will create the router cavity and simultaneously crest to more cavity the left side will house 3 drawers ( probably 1 drawer for bits and the 2 not sure what will be in there but I’m sure I’ll find a use)

The right side will just be a cavity with a solid oak hinged panel they will allow me access to the the wiring for my paddle switch and router cord.

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown”



2 comments so far

View rambo2_981's profile

rambo2_981

6 posts in 1221 days


#1 posted 02-28-2017 09:12 PM

Ed do you use plywood from the BORG?

View EdsCustomWoodCrafts's profile

EdsCustomWoodCrafts

800 posts in 1423 days


#2 posted 02-28-2017 09:38 PM



Ed do you use plywood from the BORG?

- rambo2_981


Yes I do

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown”

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com