LumberJocks

The dump truck #18: Cylinder box

  • Advertise with us
Blog entry by Dutchy posted 03-01-2016 08:30 PM 775 reads 0 times favorited 7 comments Add to Favorites Watch
« Part 17: Dump box rear trim Part 18 of The dump truck series Part 19: The dump box tailgate »

I made two times this box. The first ended up in the trash. The pictures are used are from the first and the second, but the creative process is hopefully clear.

-- My englisch is bad but how is your dutch?



7 comments so far

View htl's profile

htl

2213 posts in 624 days


#1 posted 03-01-2016 08:58 PM

Nice work dutchy!!!
Every one has a different ways of doing things and has different tools to work with, for me if the plans have one long straight edge I like to cut the plans on the line and glue the pattern to the long straight edge then if there are any good corners I can cut them with my sliding table on my small table saw.
When I’m saying this I mean for the bigger parts not some of the little tiny stuff. lol

I should add that I use skill saw blades on my table saw with very thin blades. I get a very clean and smooth cut..

Love all your how tos your really into it today and thanks!!!

-- There's a hundred ways to do anything, alot depends on the tools at hand.

View Dutchy's profile (online now)

Dutchy

2019 posts in 1634 days


#2 posted 03-01-2016 09:08 PM

Bruce you are right by saying that every one has different ways of doing things. You may have noriced that I,m only using my table saw as a bench. I use almost always the bandsaw and have a very heavy sander. And bisides I get the sandpaper for free. The broken industriel ones from 1300×1800mm 80 grit. From this piece I can make 6 disk pieces.

BTW: Can I tempt you to also make how to?

-- My englisch is bad but how is your dutch?

View htl's profile

htl

2213 posts in 624 days


#3 posted 03-02-2016 12:11 AM

That’s part of it I have a very small disk sander so sanding the long stuff just doesn’t work for me.
Many times I make comments more for other readers than for you and hope you don’t mind.
If I remember right you have one out standing table saw but really not to good for the very small parts.
The sander is much safer and you can sneak up on a line a lot easier.
I’ve been noticing you using your band saw in a lot of places where I use the table saw.
I really haven’t used my band saw much but am starting to keep it in mind for use more often.
I think I need to get a better blade with a finer tooth for the small stuff.

I started making some how toes but quit using my apple computer which made it easy to put comments in the pictures like you do.
Since I’ve switched back over to a windows computer I haven’t yet found a program to easily add these comments.
The paint program is garbage for this.

-- There's a hundred ways to do anything, alot depends on the tools at hand.

View johnstoneb's profile

johnstoneb

2145 posts in 1638 days


#4 posted 03-02-2016 02:44 PM

Good progress

-- Bruce, Boise, ID

View helluvawreck's profile

helluvawreck

23181 posts in 2332 days


#5 posted 03-02-2016 07:37 PM

This is a very interesting post. Thanks.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View crowie's profile

crowie

1497 posts in 1416 days


#6 posted 03-03-2016 08:57 AM

Top job sir….

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View stefang's profile

stefang

15512 posts in 2799 days


#7 posted 03-27-2016 02:10 PM

Nice.

-- Mike, an American living in Norway.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com