LumberJocks

The dump truck #17: Dump box rear trim

  • Advertise with us
Blog entry by Dutchy posted 03-01-2016 08:20 PM 715 reads 0 times favorited 5 comments Add to Favorites Watch
« Part 16: Dump box top rail Part 17 of The dump truck series Part 18: Cylinder box »

See pictures.

x

-- My englisch is bad but how is your dutch?



5 comments so far

View htl's profile (online now)

htl

2218 posts in 625 days


#1 posted 03-01-2016 08:27 PM

Great how to!
like the sand paper spacer idea, will help hold it in place as it is driller.
It really helps when you show the plans as at the top to see what your working on. Thanks

-- There's a hundred ways to do anything, alot depends on the tools at hand.

View Dutchy's profile

Dutchy

2020 posts in 1634 days


#2 posted 03-01-2016 09:11 PM

It really helps when you show the plans as at the top to see what your working on.

Thanks for this hint

-- My englisch is bad but how is your dutch?

View htl's profile (online now)

htl

2218 posts in 625 days


#3 posted 03-02-2016 12:20 AM

Most of the time it’s not needed but when you get down deep into somethings it really helps.
Like this hing if not for the plans I wouldn’t have noticed the hing went in a slot.
Like all things with these plans you really have to study them to get all the facts.
But I must say that’s half the fun of these plans you have to work at it.

Some times I think it might be helpful to show the finished picture of the part you are doing first then show how it’s done.

Us model makers know where you’re going but some one coming in for a first look would be last and leave before they get a chance to see the fine finish.
Just my humble $.02

-- There's a hundred ways to do anything, alot depends on the tools at hand.

View crowie's profile

crowie

1497 posts in 1417 days


#4 posted 03-03-2016 09:01 AM

So many little bits to be made and they must be done just right….good you’re on the job Dutchy…..

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View stefang's profile

stefang

15512 posts in 2800 days


#5 posted 03-27-2016 02:08 PM

I think that with a good scroll saw your cuts on the smaller pieces would be smooth enough so you could avoid sanding Jan. I’m just trying to tempt you into buying a good scroll saw.

-- Mike, an American living in Norway.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com