LumberJocks Woodworking Forum banner
93K views 105 replies 20 participants last post by  Ken90712 
#1 ·
Chassis

I started building a wooden combine.

Below a set of pictures of the building proces of the chassis. I made this chassis out of 6 pieces. On the construction drawing it is one piece. I like to use more pieces. I have no pretensions to say that this is the right way, It is only my way. It is quite possible making the chassis out of one piece.

Rectangle Wood Architecture Slope Flooring


Rectangle Wood Office ruler Line Schematic


Saw Tool Chainsaw Wood Toy


Wood Automotive tire Bumper Font Auto part


Automotive tire Bumper Bicycle part Gas Tool


Rectangle Material property Tints and shades Font Wood


Wood Rectangle Floor Font Flooring


Font Line Rectangle Wood Parallel


Rectangle Wood Office ruler Line Font


Wood Font Wood stain Hardwood Parallel


Parallel Engineering Tool Font Wood


Musical instrument accessory Electronic instrument Audio equipment Engineering Metal


Rectangle Wood Office ruler Flooring Floor


Wood Office ruler Wood stain Gas Hardwood


Axe Wood Hand tool Tool Stonemason's hammer


Wood Brush Font Tints and shades Gas


Rectangle Font Wood Line Material property


Wood Rectangle Line Office equipment Font


Thanks for watching
 

Attachments

See less See more
36
#2 ·
Chassis

I started building a wooden combine.

Below a set of pictures of the building proces of the chassis. I made this chassis out of 6 pieces. On the construction drawing it is one piece. I like to use more pieces. I have no pretensions to say that this is the right way, It is only my way. It is quite possible making the chassis out of one piece.

Rectangle Wood Architecture Slope Flooring


Rectangle Wood Office ruler Line Schematic


Saw Tool Chainsaw Wood Toy


Wood Automotive tire Bumper Font Auto part


Automotive tire Bumper Bicycle part Gas Tool


Rectangle Material property Tints and shades Font Wood


Wood Rectangle Floor Font Flooring


Font Line Rectangle Wood Parallel


Rectangle Wood Office ruler Line Font


Wood Font Wood stain Hardwood Parallel


Parallel Engineering Tool Font Wood


Musical instrument accessory Electronic instrument Audio equipment Engineering Metal


Rectangle Wood Office ruler Flooring Floor


Wood Office ruler Wood stain Gas Hardwood


Axe Wood Hand tool Tool Stonemason's hammer


Wood Brush Font Tints and shades Gas


Rectangle Font Wood Line Material property


Wood Rectangle Line Office equipment Font


Thanks for watching
You are one busy guy. Looks like you are off to a great start
 

Attachments

#3 ·
Chassis

I started building a wooden combine.

Below a set of pictures of the building proces of the chassis. I made this chassis out of 6 pieces. On the construction drawing it is one piece. I like to use more pieces. I have no pretensions to say that this is the right way, It is only my way. It is quite possible making the chassis out of one piece.

Rectangle Wood Architecture Slope Flooring


Rectangle Wood Office ruler Line Schematic


Saw Tool Chainsaw Wood Toy


Wood Automotive tire Bumper Font Auto part


Automotive tire Bumper Bicycle part Gas Tool


Rectangle Material property Tints and shades Font Wood


Wood Rectangle Floor Font Flooring


Font Line Rectangle Wood Parallel


Rectangle Wood Office ruler Line Font


Wood Font Wood stain Hardwood Parallel


Parallel Engineering Tool Font Wood


Musical instrument accessory Electronic instrument Audio equipment Engineering Metal


Rectangle Wood Office ruler Flooring Floor


Wood Office ruler Wood stain Gas Hardwood


Axe Wood Hand tool Tool Stonemason's hammer


Wood Brush Font Tints and shades Gas


Rectangle Font Wood Line Material property


Wood Rectangle Line Office equipment Font


Thanks for watching
A good start.
 

Attachments

#4 ·
Chassis

I started building a wooden combine.

Below a set of pictures of the building proces of the chassis. I made this chassis out of 6 pieces. On the construction drawing it is one piece. I like to use more pieces. I have no pretensions to say that this is the right way, It is only my way. It is quite possible making the chassis out of one piece.

Rectangle Wood Architecture Slope Flooring


Rectangle Wood Office ruler Line Schematic


Saw Tool Chainsaw Wood Toy


Wood Automotive tire Bumper Font Auto part


Automotive tire Bumper Bicycle part Gas Tool


Rectangle Material property Tints and shades Font Wood


Wood Rectangle Floor Font Flooring


Font Line Rectangle Wood Parallel


Rectangle Wood Office ruler Line Font


Wood Font Wood stain Hardwood Parallel


Parallel Engineering Tool Font Wood


Musical instrument accessory Electronic instrument Audio equipment Engineering Metal


Rectangle Wood Office ruler Flooring Floor


Wood Office ruler Wood stain Gas Hardwood


Axe Wood Hand tool Tool Stonemason's hammer


Wood Brush Font Tints and shades Gas


Rectangle Font Wood Line Material property


Wood Rectangle Line Office equipment Font


Thanks for watching
Nice work. I like your method of building up the chassis from different pieces of wood. I also prefer this method.
 

Attachments

#5 ·
Chassis

I started building a wooden combine.

Below a set of pictures of the building proces of the chassis. I made this chassis out of 6 pieces. On the construction drawing it is one piece. I like to use more pieces. I have no pretensions to say that this is the right way, It is only my way. It is quite possible making the chassis out of one piece.

Rectangle Wood Architecture Slope Flooring


Rectangle Wood Office ruler Line Schematic


Saw Tool Chainsaw Wood Toy


Wood Automotive tire Bumper Font Auto part


Automotive tire Bumper Bicycle part Gas Tool


Rectangle Material property Tints and shades Font Wood


Wood Rectangle Floor Font Flooring


Font Line Rectangle Wood Parallel


Rectangle Wood Office ruler Line Font


Wood Font Wood stain Hardwood Parallel


Parallel Engineering Tool Font Wood


Musical instrument accessory Electronic instrument Audio equipment Engineering Metal


Rectangle Wood Office ruler Flooring Floor


Wood Office ruler Wood stain Gas Hardwood


Axe Wood Hand tool Tool Stonemason's hammer


Wood Brush Font Tints and shades Gas


Rectangle Font Wood Line Material property


Wood Rectangle Line Office equipment Font


Thanks for watching
looking good!, I am impressed you also took the time to match the grain!
 

Attachments

#6 ·
Chassis

I started building a wooden combine.

Below a set of pictures of the building proces of the chassis. I made this chassis out of 6 pieces. On the construction drawing it is one piece. I like to use more pieces. I have no pretensions to say that this is the right way, It is only my way. It is quite possible making the chassis out of one piece.

Rectangle Wood Architecture Slope Flooring


Rectangle Wood Office ruler Line Schematic


Saw Tool Chainsaw Wood Toy


Wood Automotive tire Bumper Font Auto part


Automotive tire Bumper Bicycle part Gas Tool


Rectangle Material property Tints and shades Font Wood


Wood Rectangle Floor Font Flooring


Font Line Rectangle Wood Parallel


Rectangle Wood Office ruler Line Font


Wood Font Wood stain Hardwood Parallel


Parallel Engineering Tool Font Wood


Musical instrument accessory Electronic instrument Audio equipment Engineering Metal


Rectangle Wood Office ruler Flooring Floor


Wood Office ruler Wood stain Gas Hardwood


Axe Wood Hand tool Tool Stonemason's hammer


Wood Brush Font Tints and shades Gas


Rectangle Font Wood Line Material property


Wood Rectangle Line Office equipment Font


Thanks for watching
Wow Dutchy, Off an running like a shot out of a gun sir….

You certainly have got stuck into this project quickly….

THANK YOU for the photos and build notes, very much appreciated….
 

Attachments

#7 ·
Chassis

I started building a wooden combine.

Below a set of pictures of the building proces of the chassis. I made this chassis out of 6 pieces. On the construction drawing it is one piece. I like to use more pieces. I have no pretensions to say that this is the right way, It is only my way. It is quite possible making the chassis out of one piece.

Rectangle Wood Architecture Slope Flooring


Rectangle Wood Office ruler Line Schematic


Saw Tool Chainsaw Wood Toy


Wood Automotive tire Bumper Font Auto part


Automotive tire Bumper Bicycle part Gas Tool


Rectangle Material property Tints and shades Font Wood


Wood Rectangle Floor Font Flooring


Font Line Rectangle Wood Parallel


Rectangle Wood Office ruler Line Font


Wood Font Wood stain Hardwood Parallel


Parallel Engineering Tool Font Wood


Musical instrument accessory Electronic instrument Audio equipment Engineering Metal


Rectangle Wood Office ruler Flooring Floor


Wood Office ruler Wood stain Gas Hardwood


Axe Wood Hand tool Tool Stonemason's hammer


Wood Brush Font Tints and shades Gas


Rectangle Font Wood Line Material property


Wood Rectangle Line Office equipment Font


Thanks for watching
Looks good Jan. It should be a fun build to watch.
 

Attachments

#8 ·
Chassis

I started building a wooden combine.

Below a set of pictures of the building proces of the chassis. I made this chassis out of 6 pieces. On the construction drawing it is one piece. I like to use more pieces. I have no pretensions to say that this is the right way, It is only my way. It is quite possible making the chassis out of one piece.

Rectangle Wood Architecture Slope Flooring


Rectangle Wood Office ruler Line Schematic


Saw Tool Chainsaw Wood Toy


Wood Automotive tire Bumper Font Auto part


Automotive tire Bumper Bicycle part Gas Tool


Rectangle Material property Tints and shades Font Wood


Wood Rectangle Floor Font Flooring


Font Line Rectangle Wood Parallel


Rectangle Wood Office ruler Line Font


Wood Font Wood stain Hardwood Parallel


Parallel Engineering Tool Font Wood


Musical instrument accessory Electronic instrument Audio equipment Engineering Metal


Rectangle Wood Office ruler Flooring Floor


Wood Office ruler Wood stain Gas Hardwood


Axe Wood Hand tool Tool Stonemason's hammer


Wood Brush Font Tints and shades Gas


Rectangle Font Wood Line Material property


Wood Rectangle Line Office equipment Font


Thanks for watching
Looks good dutchy. Thanks for the pm, but alas I was just a city kid who spent summers on the family farm. It does look close enough to that Deere though. Maybe LJ richgreer could shed some insight on its resemblance. He is likely one of many implement aficionados around these parts.

I like your lathe sanding set up. Maybe a pic of it's makeup? Did you build it?

Lol. I almost bought a disc sander the other day. Your pic reminded me I already have a lathe that is capable. I've only had it a couple months, my first lathe, and had forgotten all about using it like that. Thanks!
 

Attachments

#9 ·
Chassis

I started building a wooden combine.

Below a set of pictures of the building proces of the chassis. I made this chassis out of 6 pieces. On the construction drawing it is one piece. I like to use more pieces. I have no pretensions to say that this is the right way, It is only my way. It is quite possible making the chassis out of one piece.

Rectangle Wood Architecture Slope Flooring


Rectangle Wood Office ruler Line Schematic


Saw Tool Chainsaw Wood Toy


Wood Automotive tire Bumper Font Auto part


Automotive tire Bumper Bicycle part Gas Tool


Rectangle Material property Tints and shades Font Wood


Wood Rectangle Floor Font Flooring


Font Line Rectangle Wood Parallel


Rectangle Wood Office ruler Line Font


Wood Font Wood stain Hardwood Parallel


Parallel Engineering Tool Font Wood


Musical instrument accessory Electronic instrument Audio equipment Engineering Metal


Rectangle Wood Office ruler Flooring Floor


Wood Office ruler Wood stain Gas Hardwood


Axe Wood Hand tool Tool Stonemason's hammer


Wood Brush Font Tints and shades Gas


Rectangle Font Wood Line Material property


Wood Rectangle Line Office equipment Font


Thanks for watching
Thank you all for so many response.

woodcox
Alas also richgreer didn,t know what type of John Deere it is. He is a man with knowledge of the JD's before 1970.

About the disc sander; "If you send me your personal email address you will get some pictures from me".
 

Attachments

#10 ·
Container frame

A lot of pictures of the building process of the combine container. All about only 8 pieces of wood and 1 drill hole.
Mainly it was: sawing apart, glueing together, sawing apart, glueing together, sawing….etc. etc.

When you see something with can be done easier please let me know!

Wood Rectangle Gas Flooring Font


Wood Rectangle Bumper Gas Machine tool


Wood Rectangle Wood stain Flooring Tints and shades


Rectangle Wood Wood stain Font Hardwood


Wood Engineering Gas Automotive tire Machine


Rectangle Triangle Slope Line Font


Triangle Rectangle Font Wood Circle


Rectangle Material property Font Tints and shades Office supplies


Rectangle Wood Triangle Flooring Hardwood


Product Chair Wood Rectangle Floor


Rectangle World Font Slope Parallel


Wood Font Engineering Parallel Tints and shades


Wood Flooring Floor Rectangle Font


Rectangle Wood Font Office equipment Material property


Wood Rectangle Font Material property Slope


Wood Floor Flooring Bumper Tool


Drinkware Cup Drink Font Serveware


Rectangle Organism Triangle Wood Font


Wood Line Metalworking hand tool Auto part Office ruler


Wood Floor Automotive tire Flooring Gas


Rectangle Wood Line Font Parallel


Office ruler Wood Tool Hardwood Plywood


Automotive tire Wood Bumper Font Bicycle part


Wood Motor vehicle Automotive exterior Rectangle Automotive lighting


Wood Chair Rectangle Wood stain Hardwood


Rectangle Gas Font Tints and shades Composite material


Wood Rectangle Vehicle door Font Tints and shades


Table Wood Rectangle Font Wood stain


Rectangle Wood Flooring Hardwood Tints and shades


Rectangle Wood Font Material property Parallel


Thanks for watching
 

Attachments

#11 ·
Container frame

A lot of pictures of the building process of the combine container. All about only 8 pieces of wood and 1 drill hole.
Mainly it was: sawing apart, glueing together, sawing apart, glueing together, sawing….etc. etc.

When you see something with can be done easier please let me know!

Wood Rectangle Gas Flooring Font


Wood Rectangle Bumper Gas Machine tool


Wood Rectangle Wood stain Flooring Tints and shades


Rectangle Wood Wood stain Font Hardwood


Wood Engineering Gas Automotive tire Machine


Rectangle Triangle Slope Line Font


Triangle Rectangle Font Wood Circle


Rectangle Material property Font Tints and shades Office supplies


Rectangle Wood Triangle Flooring Hardwood


Product Chair Wood Rectangle Floor


Rectangle World Font Slope Parallel


Wood Font Engineering Parallel Tints and shades


Wood Flooring Floor Rectangle Font


Rectangle Wood Font Office equipment Material property


Wood Rectangle Font Material property Slope


Wood Floor Flooring Bumper Tool


Drinkware Cup Drink Font Serveware


Rectangle Organism Triangle Wood Font


Wood Line Metalworking hand tool Auto part Office ruler


Wood Floor Automotive tire Flooring Gas


Rectangle Wood Line Font Parallel


Office ruler Wood Tool Hardwood Plywood


Automotive tire Wood Bumper Font Bicycle part


Wood Motor vehicle Automotive exterior Rectangle Automotive lighting


Wood Chair Rectangle Wood stain Hardwood


Rectangle Gas Font Tints and shades Composite material


Wood Rectangle Vehicle door Font Tints and shades


Table Wood Rectangle Font Wood stain


Rectangle Wood Flooring Hardwood Tints and shades


Rectangle Wood Font Material property Parallel


Thanks for watching
looking good!
 

Attachments

#16 ·
Dusthood

Seven pictures about 2 pieces of wood. The "building" process of the dusthood















Thanks for watching
Progress and precision, so far so good!
 

Attachments

#21 ·
Trim strip

Mounting a small wenge strip to the combine for accentuation.

Wood Rectangle Fixture Composite material Material property


Wood Wood stain Floor Flooring Hardwood


Rectangle Wood Hardwood Wood stain Font


Wood Rectangle Font Material property Hardwood


Rectangle Packing materials Wood Wood stain Hardwood


Wood Rectangle Wooden block Floor Flooring


Thanks for watching
Interesting build so far Jan. I like the strip inlay
 

Attachments

#27 ·
Glue test (first attempt)

In my blog about the Peterbilt truck I mentioned about the problems about glueing the dowels. I got two idea's to solf this problem.

The first was from kweinert. I think a good idea and maybe I will try this later. The benefits of his proposal is that you can tension the dowels. The disadvantage is that for every angle you have to make a jig and also crossing and T connections are difficult to make,

The second was from Mike. If it would work the way he proposed it would be very easy to make all the different dowel glueings. Though I had my doubts about the strength I gave it a try.

Below three pictures about the trying process. The glue I used is super (CA) glue:

Plant Art Font Rectangle Circuit component

.
.

Font Line Rectangle Parallel Triangle

.
.

Line Font Art Parallel Rectangle

.

But unfortunately when I pulled the tape off all the connections got broken.

I really like Mike's idea so yesterday I bought epoxy glue and next week I will give it another try. I also challenge everyone to come up with ideas All idea's are welcome.

Thank for watching.
 

Attachments

#28 ·
Glue test (first attempt)

In my blog about the Peterbilt truck I mentioned about the problems about glueing the dowels. I got two idea's to solf this problem.

The first was from kweinert. I think a good idea and maybe I will try this later. The benefits of his proposal is that you can tension the dowels. The disadvantage is that for every angle you have to make a jig and also crossing and T connections are difficult to make,

The second was from Mike. If it would work the way he proposed it would be very easy to make all the different dowel glueings. Though I had my doubts about the strength I gave it a try.

Below three pictures about the trying process. The glue I used is super (CA) glue:

Plant Art Font Rectangle Circuit component

.
.

Font Line Rectangle Parallel Triangle

.
.

Line Font Art Parallel Rectangle

.

But unfortunately when I pulled the tape off all the connections got broken.

I really like Mike's idea so yesterday I bought epoxy glue and next week I will give it another try. I also challenge everyone to come up with ideas All idea's are welcome.

Thank for watching.
Probably the easiest solution would be to keep all the holes near the edge of the platter, then you could clamp a small piece of wood over the glued pieces just below the hole to hold them tightly in place while you remove the tape.

An alternative solution would be to use veneer tape. Veneer tape is strong, but made from very thin paper with a water based adhesive. That way you can just use a damp sponge to wet the glue side before application and then wet it with a mist spray or a wet sponge to remove it. It soaks up the water very quickly and is then very easy to remove without putting too much pressure on your delicate glue-up.
 

Attachments

#34 ·
Glue test (second attempt)

This time I used transparent epoxy glue for glueing the small dowels from 2,3 and 4 mm.

Below the fixturing with tape on a flat surface. The glue is unilaterally applied.

Wood Yellow Wheel Font Line


After two hours….............

Triangle Font Art Wood Circle


Sanding wasn't a problem. And I hope also varnishing does not give problems

Thanks to all who came up with ideas, in particular Mike who came with the idea of fixturing with tape on a flat surface.
 

Attachments

#35 ·
Glue test (second attempt)

This time I used transparent epoxy glue for glueing the small dowels from 2,3 and 4 mm.

Below the fixturing with tape on a flat surface. The glue is unilaterally applied.

Wood Yellow Wheel Font Line


After two hours….............

Triangle Font Art Wood Circle


Sanding wasn't a problem. And I hope also varnishing does not give problems

Thanks to all who came up with ideas, in particular Mike who came with the idea of fixturing with tape on a flat surface.
Nice way to prove the strength and avoid aggravation on the actual project .
If this didn't work for you I was going to suggest to maybe incorporate a bent metal rod to add strength but it looks like you are on your way .

Klaus
 

Attachments

#41 ·
Cabin

Below picture's of making the cabin.

( For the lights and the ladder their are separate chapters).

Rectangle Font Handwriting Parallel Technology


Rectangle Wood Font Handwriting Line


Rectangle Font Line Wood Parallel


Wood Rectangle Font Line Parallel


Font Parallel Diagram Plan Engineering


Wood Rectangle Font Slope Parallel


Wood Tool Floor Flooring Gas


Thanks for watching
Nice Chair!
 

Attachments

#44 ·
Cabin lights

This lights in the cabin are made to my own idea. They are not original in the T and J plans.

Rectangle Font Line Handwriting Material property


Engineering Auto part Automotive wheel system Carmine Machine


Rectangle Font Parallel Wood Schematic


Naval architecture Font Urban design Engineering Parallel


Font Line Rectangle Parallel Space


Thanks for watching
This is looking good. It's always good to add thhing the plans leave out.
 

Attachments

#50 ·
Cabin ladder

Below pictures from making the cabin ladder.

Rectangle Wood Brick Art Font


Passive circuit component Circuit component Hardware programmer Wood Electronic component


Rectangle Wood Font Slope Parallel


Office supplies Office equipment Font Line Rectangle


Product Wood Cloud Rectangle Font


Wood Rectangle Floor Flooring Font


Rectangle Wood Flooring Floor Font


Automotive tire Wood Bumper Material property Gas


Amber Tableware Rectangle Yellow Material property


Wood Office ruler Office supplies Parallel Rectangle


Wood Parallel Rectangle Composite material Engineering


Thanks for watching
 

Attachments

#51 ·

Attachments

#53 ·
Container extension

The container extension made out of ash and wenge.

Wood Wood stain Font Hardwood Rectangle


Wood Rectangle Tints and shades Font Triangle


Wood Rectangle Tints and shades Hardwood Font


Wood Engineering Bicycle part Machine Machine tool


Wood Hardwood Wood stain Automotive exterior Flooring


Product Rectangle Wood Font Material property


Yellow Wood Tool Gas Composite material


Automotive tire Wood Drilling Drill Gas


Wood Rectangle Font Floor Flooring


Wood Rectangle Font Flooring Hardwood


Thanks for watching
 

Attachments

#54 ·
Container extension

The container extension made out of ash and wenge.

Wood Wood stain Font Hardwood Rectangle


Wood Rectangle Tints and shades Font Triangle


Wood Rectangle Tints and shades Hardwood Font


Wood Engineering Bicycle part Machine Machine tool


Wood Hardwood Wood stain Automotive exterior Flooring


Product Rectangle Wood Font Material property


Yellow Wood Tool Gas Composite material


Automotive tire Wood Drilling Drill Gas


Wood Rectangle Font Floor Flooring


Wood Rectangle Font Flooring Hardwood


Thanks for watching
Lots of detail here. Thanks for your efforts in educating us who might not appreciate the work that goes into your projects.
 

Attachments

#57 ·
Cutterbar

Below pictures of the combine cutterbar and suspension.

Rectangle Wood Office ruler Ruler Font


Office supplies Wood Tool Font Material property


Ruler Wood Rectangle Font Parallel


Wood Bumper Gas Automotive exterior Composite material


Wood Rectangle Font Wood stain Hardwood


Wood Automotive exterior Tool Bumper Hardwood


Wood Office ruler Tool Saw Hardwood


Font Rectangle Line Handwriting Material property


Thanks for watching
Looking good! It's bigger than I imagined, good sized project.
 

Attachments

#59 ·
Cutterbar rotor

Pictures of making the cutterbar rotor. Also three pictures of making a small center jig.

Wood Wood stain Natural material Rectangle Font


Dice Dice game Font Table Indoor games and sports


Asphalt Font Road surface Space Bumper


Motor vehicle Wood Gas Font Bumper


Rectangle Wood Flooring Floor Font


Rectangle Font Wood Gas Machine


Wood Tool Gas Font Metal


Office ruler Line Slope Font Ruler


Wood Font Parallel Handwriting Triangle


Font Rectangle Parallel Handwriting Stationery

Handwriting Wood Font Rectangle Office supplies


Thanks for watching
 

Attachments

#60 ·
Cutterbar rotor

Pictures of making the cutterbar rotor. Also three pictures of making a small center jig.

Wood Wood stain Natural material Rectangle Font


Dice Dice game Font Table Indoor games and sports


Asphalt Font Road surface Space Bumper


Motor vehicle Wood Gas Font Bumper


Rectangle Wood Flooring Floor Font


Rectangle Font Wood Gas Machine


Wood Tool Gas Font Metal


Office ruler Line Slope Font Ruler


Wood Font Parallel Handwriting Triangle


Font Rectangle Parallel Handwriting Stationery

Handwriting Wood Font Rectangle Office supplies


Thanks for watching
OK, exactly what does this do ? Maybe I'm missing something, what does a cutter bar cut ?
 

Attachments

#76 ·
Jig for making tractor wheels

Below 20 pictures from making a jig. This jig is used on a router table to make notches in tractor wheels, but it's also possible to use it on circle saw. You can't see it on the the pictures but this jig glides between two guides.

"There is also a blog of this jig for perpendicular grooves.

Rectangle Font Parallel Pattern Diagram


Rectangle Wood Automotive exterior Gas Composite material


Rectangle Font Parallel Slope Diagram


Wood Astronomical object Tints and shades Sky Gas


Wood Material property Tints and shades Rectangle Circle


Wood Rectangle Font Tints and shades Circle


Rectangle Organism Wood Tints and shades Circle


Wood Gas Metal Circle Sports equipment


Hood Automotive tire Automotive lighting Grille Automotive exterior


Rectangle Parallel Font Number Diagram


Brown Rectangle Wood Floor Flooring


Rectangle Wood Automotive exterior Bumper Font


Font Wood Musical instrument Asphalt Road surface


Font Cutting mat Wood Automotive exterior Model aircraft


Wood Automotive tire Flooring Wood stain Hardwood


Wood Rectangle Font Hardwood Audio equipment


Musical instrument accessory Guitar accessory Wood Audio equipment Music


Wood Machine tool Metal Machine Musical instrument


Wood Font Rectangle Metal Engineering


Wood Gas Rectangle Circle Electric blue


Thanks for watching
 

Attachments

#77 ·
Jig for making tractor wheels

Below 20 pictures from making a jig. This jig is used on a router table to make notches in tractor wheels, but it's also possible to use it on circle saw. You can't see it on the the pictures but this jig glides between two guides.

"There is also a blog of this jig for perpendicular grooves.

Rectangle Font Parallel Pattern Diagram


Rectangle Wood Automotive exterior Gas Composite material


Rectangle Font Parallel Slope Diagram


Wood Astronomical object Tints and shades Sky Gas


Wood Material property Tints and shades Rectangle Circle


Wood Rectangle Font Tints and shades Circle


Rectangle Organism Wood Tints and shades Circle


Wood Gas Metal Circle Sports equipment


Hood Automotive tire Automotive lighting Grille Automotive exterior


Rectangle Parallel Font Number Diagram


Brown Rectangle Wood Floor Flooring


Rectangle Wood Automotive exterior Bumper Font


Font Wood Musical instrument Asphalt Road surface


Font Cutting mat Wood Automotive exterior Model aircraft


Wood Automotive tire Flooring Wood stain Hardwood


Wood Rectangle Font Hardwood Audio equipment


Musical instrument accessory Guitar accessory Wood Audio equipment Music


Wood Machine tool Metal Machine Musical instrument


Wood Font Rectangle Metal Engineering


Wood Gas Rectangle Circle Electric blue


Thanks for watching
Now that's a mammoth effort on the jigs Dutchy….
Thank you for sharing just how much you've put into this model/toy…first class effort, indeed....
 

Attachments

#88 ·
Wheels

Normal I make the wheels on the lathe, but this time I did it without. It was an enjoyable experience. Below you can see how it was done.

Wood Rectangle Flooring Font Floor


Art Font Tints and shades Circle Pattern


Automotive tire Font Gas Circle Rim


Tool Wood Kitchen utensil Gas Font


Automotive tire Wood Rim Tree Tool


Table Automotive tire Wood Floor Road surface


Wood Tree Font Coffee Rectangle


Automotive tire Font Grass Terrestrial plant Automotive wheel system


Eye Wood Gas Circle Flooring


Wood Wood stain Hardwood Metal Plywood


Gear Bicycle part Plant Font Auto part


Circle Font Art Wood Blowfish


Product Office supplies Plastic Gas Auto part


Wood Floor Flooring Automotive tire Wood stain


Plant Gear Automotive tire Wood Automotive wheel system


Tire Automotive tire Wheel Wood Gas


Plant Gear Wood Automotive tire Tree


Tire Wheel Automotive tire Tread Synthetic rubber

.
.
Thanks for watching
 

Attachments

#89 ·
Wheels

Normal I make the wheels on the lathe, but this time I did it without. It was an enjoyable experience. Below you can see how it was done.

Wood Rectangle Flooring Font Floor


Art Font Tints and shades Circle Pattern


Automotive tire Font Gas Circle Rim


Tool Wood Kitchen utensil Gas Font


Automotive tire Wood Rim Tree Tool


Table Automotive tire Wood Floor Road surface


Wood Tree Font Coffee Rectangle


Automotive tire Font Grass Terrestrial plant Automotive wheel system


Eye Wood Gas Circle Flooring


Wood Wood stain Hardwood Metal Plywood


Gear Bicycle part Plant Font Auto part


Circle Font Art Wood Blowfish


Product Office supplies Plastic Gas Auto part


Wood Floor Flooring Automotive tire Wood stain


Plant Gear Automotive tire Wood Automotive wheel system


Tire Automotive tire Wheel Wood Gas


Plant Gear Wood Automotive tire Tree


Tire Wheel Automotive tire Tread Synthetic rubber

.
.
Thanks for watching
Well done..and a very good how to article…
 

Attachments

#102 ·
Little different/extra

It is some time ago that I posted a blog entry. The reason is that I was waiting for a steering wheel I ordered in the USA. I took 7 weeks.

Below some pictures of what I did extra or different than the building plan

Sleeve Wood Window Floor Collar


Rectangle Wood Font Automotive exterior Electric blue


Product Automotive tire Tire Wood Rectangle


Automotive lighting Rectangle Automotive exterior Font Fashion accessory


Gas Wood Electric blue Sleeve Room


Automotive tire Tire Wood Gas Bicycle part


Wheel Motor vehicle Tire Automotive tire Vehicle


Thanks for wathing.
 

Attachments

#103 ·
Little different/extra

It is some time ago that I posted a blog entry. The reason is that I was waiting for a steering wheel I ordered in the USA. I took 7 weeks.

Below some pictures of what I did extra or different than the building plan

Sleeve Wood Window Floor Collar


Rectangle Wood Font Automotive exterior Electric blue


Product Automotive tire Tire Wood Rectangle


Automotive lighting Rectangle Automotive exterior Font Fashion accessory


Gas Wood Electric blue Sleeve Room


Automotive tire Tire Wood Gas Bicycle part


Wheel Motor vehicle Tire Automotive tire Vehicle


Thanks for wathing.
Excellent Dutchy! I was wondering if the project lost momentum, I have 4 small cars that I can't find time to complete, good to see it was just supplier delays. Does this post mean your finished? looking forward to seeing the final deal! thanks for sharing.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top