The pieces become smaller. Her are the pictures from the roof lights.
First put some dowels with CA glue in a piece of padouk:
After sanding the crude form:
Turning on the lathe. This with the greatest caution I turned with…...sandpaper:
When it was done I realized I made 8 but needed 10. My disc sander was mounted on the lathe and I didn,t want to do a conversion. I put one piece in my drill and made a light on the discsander. This was much easier and faster:
And after made a small bevel on the lights they where mounted on the roof. You also can see the horns made out of a golf tee:
Thanks for wathing
-- My englisch is bad but how is your dutch?