LumberJocks

Fordson super dexta wooden model #22: Front wheels, Chapter 16

  • Advertise with us
Blog entry by Dutchy posted 06-14-2017 08:44 PM 1275 reads 0 times favorited 14 comments Add to Favorites Watch
« Part 21: Merged 3 Part 22 of Fordson super dexta wooden model series Part 23: Rear wheels, Chapter 17, part 1, tyres. »

Pictures below are from the making process of the front wheels of the Fordson Dexta.

5


10

15

20

25

30

35

40

Thanks for watching.

-- https://dutchypatterns.com/



14 comments so far

View socrbent's profile

socrbent

512 posts in 2053 days


#1 posted 06-14-2017 09:06 PM

As usual you have provided great detail and shown your high level of craftsmanship. Thanks!

-- socrbent Ohio

View bruce317's profile

bruce317

398 posts in 607 days


#2 posted 06-14-2017 09:22 PM

Great as always. Please tell me what router bit you used for rims. Photo # 27.
Thank you

-- Bruce - Indiana - Sawdust is just, MAN GLITTER!

View crowie's profile

crowie

1959 posts in 1735 days


#3 posted 06-14-2017 09:28 PM

Dutchy, Another very clever tutorial with some great ideas and innovations…..

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View Dutchy's profile

Dutchy

2487 posts in 1952 days


#4 posted 06-14-2017 09:32 PM



Great as always. Please tell me what router bit you used for rims. Photo # 27.
Thank you

- bruce317

The brand is unknown and the model is quarter round R2 with bearing. The router bit from pictures 26 is the same model but now with a smaller (in diameter) bearing.

-- https://dutchypatterns.com/

View Redoak49's profile

Redoak49

2794 posts in 1772 days


#5 posted 06-14-2017 10:09 PM

Very nice as you always do.

View LittleBlackDuck's profile (online now)

LittleBlackDuck

1225 posts in 604 days


#6 posted 06-14-2017 10:30 PM


Now all you need to do is invent “drill fish” and we can have a meal of fish & chips.


Great for driving sideways.

BTW. It’s incredible how I am prepared to spend a bit… no, a lot… of money on tools and machinery,

but would skimp on such overuse of carpet tape.
Stupid question, but is there any reason why such gaps between wheel placement?

PS.
Great detail and explanation. Thx.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View htl's profile

htl

2977 posts in 943 days


#7 posted 06-15-2017 12:21 AM

Nicely done!!!
Love them wheels.
This is going to be a beauty for sure.

-- There's a hundred ways to do anything, alot depends on the tools at hand.

View Dutchy's profile

Dutchy

2487 posts in 1952 days


#8 posted 06-15-2017 06:13 AM


is there any reason why such gaps between wheel placement?

- LittleBlackDuck

Not one!

-- https://dutchypatterns.com/

View Dutchy's profile

Dutchy

2487 posts in 1952 days


#9 posted 06-15-2017 06:14 AM

Thanks guys for all your comments. Much appreciated

-- https://dutchypatterns.com/

View GR8HUNTER's profile

GR8HUNTER

2766 posts in 496 days


#10 posted 06-15-2017 03:01 PM

another week ….LMAO :<))
GREAT JOB ON BLOGS Jan :<))

-- Tony Reinholds,Pa. REMEMBER TO ALWAYS HAVE FUN

View Dutchy's profile

Dutchy

2487 posts in 1952 days


#11 posted 06-15-2017 03:43 PM



another week

- GR8HUNTER

Are you that lazzy?

-- https://dutchypatterns.com/

View bruce317's profile

bruce317

398 posts in 607 days


#12 posted 06-15-2017 05:21 PM

Hi Jan,
I believe this is the right bit. Hope so, done ordered it.
https://www.lowes.com/pd/Bosch-1-16-in-Carbide-Tipped-Roundover-Bit/50325335

-- Bruce - Indiana - Sawdust is just, MAN GLITTER!

View GR8HUNTER's profile

GR8HUNTER

2766 posts in 496 days


#13 posted 06-16-2017 03:14 PM


another week

- GR8HUNTER

Are you that lazzy?

- Dutchy

no just seems like alot of work and shop time a whole day sound better LMAO :<))

-- Tony Reinholds,Pa. REMEMBER TO ALWAYS HAVE FUN

View Dutchy's profile

Dutchy

2487 posts in 1952 days


#14 posted 06-17-2017 07:18 PM



Hi Jan,
I believe this is the right bit. Hope so, done ordered it.
https://www.lowes.com/pd/Bosch-1-16-in-Carbide-Tipped-Roundover-Bit/50325335

- bruce317

Here a drawing about which router bit I used.

-- https://dutchypatterns.com/

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com