LumberJocks

Fordson super dexta wooden model #12: Engine hood, Chapter 10

  • Advertise with us
Blog entry by Dutchy posted 05-10-2017 03:16 PM 2776 reads 0 times favorited 7 comments Add to Favorites Watch
« Part 11: Fueltank, Chapter 9 Part 12 of Fordson super dexta wooden model series Part 13: Radiater hood, Chapter 11 »

Pictures below are from the making process of the engine hood of the Fordson Dexta.

x

x

x

Thanks for watching.

-- https://dutchypatterns.com/



7 comments so far

View crowie's profile

crowie

2570 posts in 2073 days


#1 posted 05-10-2017 09:11 PM

Attention to detail… great series Dutchy.

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View LittleBlackDuck's profile

LittleBlackDuck

1971 posts in 943 days


#2 posted 05-10-2017 11:53 PM

Now I understand why you took 6 days between posts,

must have taken 5 days and 23hours and 59 minutes to sand off the marked waste.

Still, quite a few neat tricks slipped into the remaining minute.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View htl's profile

htl

4062 posts in 1281 days


#3 posted 05-11-2017 02:17 AM

6 days or 6 minutes, nice work!!!

-- An Index Of My Model making Blogs here on Lumber Jocks.. http://lumberjocks.com/htl/blog/116729

View Dutchy's profile

Dutchy

3066 posts in 2290 days


#4 posted 05-11-2017 05:42 AM

Thanks! Much appreciated.

Alex it took more than 8 days to sand off the wast. Last time after it was ready I waited a couple of days before placing the pictures on LJ. But sanding did not take the full 8 days! I have allso spend some tme on changing the sandpaper.

Back to reality: Are you jealos?

-- https://dutchypatterns.com/

View LittleBlackDuck's profile

LittleBlackDuck

1971 posts in 943 days


#5 posted 05-11-2017 08:29 AM

Dutchy, with all your sanding… if you nailed all the sawdust together you could probably make 6 or 7 full sized windmills and a few extra clogs to boot.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Dutchy's profile

Dutchy

3066 posts in 2290 days


#6 posted 05-11-2017 08:38 AM

Dutchy, with all your sanding… if you nailed all the sawdust together you could probably make 6 or 7 full sized windmills and a few extra clogs to boot.

- LittleBlackDuck

-- https://dutchypatterns.com/

View LittleBlackDuck's profile

LittleBlackDuck

1971 posts in 943 days


#7 posted 05-11-2017 08:55 AM

Hope those red clogs are not from “knuckle blood” in the sawdust.

Are the ones with the ”XXX” designed for bordello visits?

-- If your first cut is too short... Take the second cut from the longer end... LBD

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com