LumberJocks

Fordson super dexta wooden model #9: Hydraulic and spider gear Chapter 7

  • Advertise with us
Blog entry by Dutchy posted 05-04-2017 05:04 PM 3059 reads 0 times favorited 7 comments Add to Favorites Watch
« Part 8: Gearbox Chaptor 6 Part 9 of Fordson super dexta wooden model series Part 10: Merged 1 »

Pictures below are from the making process of the gearbox of the Fordson Dexta.

x

Thanks for watching

-- https://dutchypatterns.com/



7 comments so far

View htl's profile

htl

3058 posts in 973 days


#1 posted 05-04-2017 09:51 PM

Great work!!!

-- There's a hundred ways to do anything, alot depends on the tools at hand.

View Pjonesy's profile

Pjonesy

206 posts in 640 days


#2 posted 05-04-2017 10:16 PM

Good to see how others build their models. Well done

-- Peter New Zealand

View LittleBlackDuck's profile

LittleBlackDuck

1273 posts in 634 days


#3 posted 05-04-2017 11:24 PM

Dutchy, Is the alignment dowel glued in and then sanded off,

or is it loose and pulled out?

I like the way you drilled that hole in your clamp to let the dowel poke through!

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Dutchy's profile

Dutchy

2516 posts in 1982 days


#4 posted 05-05-2017 06:39 AM

Thanks all.

Alex: The dowel isn’t glued. You know I use verry little text, but you are right I should have told that the dowel is loose and only temporary. That hole in my clamp wasn’t that difficult to make. The clampo is made out of aluminium.

-- https://dutchypatterns.com/

View LittleBlackDuck's profile

LittleBlackDuck

1273 posts in 634 days


#5 posted 05-05-2017 07:00 AM



Thanks all.

...You know I use verry little text, ...

- Dutchy


Then please use a BIGGER font!

PS. I guessed so as you would need the hole for the PTO , however, not seeing the back view, readers would miss that point. I only wrote this as I now know what a PTO is…

PPS. Clever use of the required hole…

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Dutchy's profile

Dutchy

2516 posts in 1982 days


#6 posted 05-05-2017 09:28 AM

Thanks all.

...You know I use verry little text, ...

- Dutchy

Then please use a BIGGER font!

PS. I guessed so as you would need the hole for the PTO , however, not seeing the back view, readers would miss that point. I only wrote this as I now know what a PTO is…

PPS. Clever use of the required hole…

- LittleBlackDuck

You are right Alex. Thanks for reply!!

-- https://dutchypatterns.com/

View crowie's profile

crowie

1991 posts in 1765 days


#7 posted 05-26-2017 12:19 PM

Thank you Dutchy for continued excellent build notes and photos…

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com