LumberJocks

Fordson super dexta wooden model #8: Gearbox Chaptor 6

  • Advertise with us
Blog entry by Dutchy posted 05-04-2017 02:48 PM 1578 reads 0 times favorited 11 comments Add to Favorites Watch
« Part 7: Transmission Chapter 5 Part 8 of Fordson super dexta wooden model series Part 9: Hydraulic and spider gear Chapter 7 »

Pictures below are from the making process of the gearbox of the Fordson Dexta.

x

x

x

x

Thanks for watching

-- https://dutchypatterns.com/



11 comments so far

View GR8HUNTER's profile (online now)

GR8HUNTER

4522 posts in 826 days


#1 posted 05-04-2017 03:04 PM

thanks again Jan for these great blogs :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View johnstoneb's profile

johnstoneb

2998 posts in 2287 days


#2 posted 05-04-2017 03:34 PM

Keep doing the blogs. I really enjoy reading them.

-- Bruce, Boise, ID

View LittleBlackDuck's profile

LittleBlackDuck

1962 posts in 935 days


#3 posted 05-04-2017 03:50 PM

Dutchy, Are those beads left over from Woodstock? No pun intended!

Very novel way of making gearsticks.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Dutchy's profile

Dutchy

3060 posts in 2282 days


#4 posted 05-04-2017 04:48 PM

Tony: When do you start making the Fordson

Bruce: Great to hear.

Alex: This beads are from China. Woodstock and China? Hmmm.

-- https://dutchypatterns.com/

View htl's profile

htl

4049 posts in 1273 days


#5 posted 05-04-2017 09:48 PM

Great blog!
This will help me greatly when I start the build but for some one just getting into modeling these blogs will be priceless as a great cure for the learning curve.

-- An Index Of My Model making Blogs here on Lumber Jocks.. http://lumberjocks.com/htl/blog/116729

View LittleBlackDuck's profile

LittleBlackDuck

1962 posts in 935 days


#6 posted 05-04-2017 10:40 PM


... Woodstock and China? Hmmm.

- Dutchy


Stir fried hippies! Hmmm, Hmmm.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View crowie's profile

crowie

2563 posts in 2065 days


#7 posted 05-26-2017 12:18 PM

Dutchy, Could I trouble you for the details of the source of the beads please…
Heaps easier than what I do when trying to make gear shift levers, thank you…

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View Dutchy's profile

Dutchy

3060 posts in 2282 days


#8 posted 05-26-2017 03:14 PM



Dutchy, Could I trouble you for the details of the source of the beads please…
Heaps easier than what I do when trying to make gear shift levers, thank you…

- crowie

Hello Crowie. I have bought them in Drachten, but maybe for you it is easier to buy them here:

-- https://dutchypatterns.com/

View LittleBlackDuck's profile

LittleBlackDuck

1962 posts in 935 days


#9 posted 05-26-2017 03:24 PM

.... but maybe for you it is easier to buy them here:

- Dutchy

Dutchy, this other feathered friend thanks you. May all your eggs be soft boiled… Thanks.

crowie, thanks for asking. At $6 for 1500 I’ll go you halves… though it’d probably cost more to post…

-- If your first cut is too short... Take the second cut from the longer end... LBD

View crowie's profile

crowie

2563 posts in 2065 days


#10 posted 05-27-2017 05:37 AM


.... but maybe for you it is easier to buy them here:

- Dutchy

Dutchy, this other feathered friend thanks you. May all your eggs be soft boiled… Thanks.

crowie, thanks for asking. At $6 for 1500 I ll go you halves… though it d probably cost more to post…

- LittleBlackDuck

Ducky, I’d prefer 6mm over 4mm; something like this http://www.ebay.com.au/itm/500-X-6mm-Natural-Wood-Bead-Unpainted-Unfinished-round-Wooden-Beads-Spacer-Ball-/162493061371?hash=item25d55758fb:g:FT0AAOSwB09YMk9c
And I’ve be more than happy to forward half on to you..

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View LittleBlackDuck's profile

LittleBlackDuck

1962 posts in 935 days


#11 posted 05-27-2017 07:39 AM


.... I’d prefer 6mm over 4mm ….

- crowie

crowie’ing about the size of your “gear stick” again?

-- If your first cut is too short... Take the second cut from the longer end... LBD

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com