LumberJocks

Kelly's Blog

  • Advertise with us
This blog is written by Kelly | 1 entry so far

Latest Entry

Making Ridgid R4512 inserts

03-09-2016 03:22 AM by Kelly | 2 comments »

I recently went out purchased a Ridgid R4512 table saw and needed some zero clearance inserts (ZCI), but at $30+ an insert I decided to take a crack at making some. Anyone who has this saw knows that these inserts are a little tricky as there are a number of small pockets where the leveling screws rest and the insert must be cut out to accommodate them. Also, there is a slight bevel just inside of the throat so the insert has to have a very thin lip around it. As I started looking at how to make a ZCI I knew a template would be the way to go! I created the first insert by using the original insert screwed to a roughly cut blank and using a flush trimming router bit very carefu...

Read this entry »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com