LumberJocks

DustyMark's Blog

  • Advertise with us
This blog is written by DustyMark | 48 entries so far

Latest Entry

Building a KARA Hummer Layout Duck Boat #9: Applying the Plywood Deck Panels

05-25-2015 03:17 PM by DustyMark | 0 comments »

Overview This is the stage where it really starts to look like a boat! With the the interior sealed and the final fitting of the anchor pole hole, collar, and sleeve complete, the deck can be installed. The sequence is similar to installing the hull panels with the added step of lining up the the through-deck hole for the anchor pole sleeve. Fitting the Bow and Stern Deck Panels The bow and stern deck panels are fastened around a curved rib and this causes the seams along the cockpit and where the panel lays across the forward rib to be thrown off of 90 degrees. It also causes the distance between the tabs over the side decks to be greater than the width of the cockpit. ...

Read this entry »

Older Entries

View all 48 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com