LumberJocks

DsRMR's Blog

  • Advertise with us
This blog is written by DsRMR | 5 entries so far

Latest Entry

shop re start the new RMR #4: stop water penetration and band saw breakdown

04-13-2017 08:58 AM by DsRMR | 0 comments »

Hello again it’s been slow going in the shop still been darn cold out plus had some water control to get under control. This was the result of poor workmanship of the pole barn that is my shop atm. The perimeter of the buildings ground work was above the bottom of the cur-agate siding, with nothing sealing the outside moisture out. I dug down about 4 inches below the siding, pulled the lower row of screws out and layed 6 mil plastic down tucking it under the siding then replaced the screws. from the inside i then filled each opening in the siding with expanding foam sealant and wala its dry inside now.. I have been also scavenging some materials to close up the open 2 bays of the s...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com