LumberJocks

DrDirt's Favorites

  • Advertise with us
View Andy's profile

Watch Box #8: Finished

02-03-2012 04:43 PM by Andy | 40 comments »

Finally I got it done and shipped it off to the customer. He wont get it in his hands until next week, so I will post his impressions when I hear back. I hope its what he wants!!! TIP:Some of you may know about this but many will not. This is my secret to quickly fine sand the box prior to spraying lacquer. I hand sanded down to 220 and then I finish up with green nylon pads. These were bought at the local dollar store. Guess how much? Thats right, a whole dollar. You can buy similar pads ...

Read this entry »


View Andy's profile

"Art Box" Tutorial #7: The Medallion

07-01-2009 06:32 PM by Andy | 23 comments »

Updated 1/15/12 Now we need to cut a recess in the lid for the medallion to set down into.DONT cut your medallion until you have routed out the home for it.I typically make the medallion about 1” to 1.5” smaller on all sides than the lid depending on the box size and the piece of wood I have for the medallion. We are now going to make a simple jig for a router to set on and run back and forth making several passes of incrementally deeper cuts. There are a several ways to do ...

Read this entry »


View dewoodwork's profile

Beautiful end grain cutting boards free project plan

11-25-2007 07:31 AM by dewoodwork | 95 comments »

Construct these beautiful end grainCutting boards Hello fellow woodworkers,In the spirit of sharing woodworking knowledge I am writing this tutorial for anyone interested in constructing these beautiful end grain cutting boards. Take a look at the photos of the four styles I have made, or create your own pattern’s and follow the steps I have outlined in this tutorial. Questions and comments are welcome, enjoy. For this board I used maple, walnut, lyptus and purpleheart. White oak, wa...

Read this entry »


View NY_Rocking_Chairs's profile

Hal Taylor Rocking Chair #1: Week 1

05-13-2009 12:14 AM by NY_Rocking_Chairs | 5 comments »

After having received several requests for a detailed blog of a rocking chair build I spoke with Hal Taylor and received his permission to do this. This chair is based on his first book and set of plans. He has a new book with updated plans which I am getting soon. This is not a full-time job for me so I will be posting one week at a time since I get to spend maybe an hour every other night on the chair. Week one sees the planing and cutting out of all the blanks. I purchase 40-50 bd...

Read this entry »


View degoose's profile

Spirals #6: We are not finished yet.

06-03-2009 02:23 AM by degoose | 18 comments »

Next step is to make the ends of the segments curved. Shell-like if you want.For that we need a new jig.. Yeah I know some of you haven’t finished the first one..!This is ultra simple.Firstly a fresh piece of ply .. 1/4 ” is fine.I inserted a bearing to make this more durable .. same same as last one.This was positioned 4.5 ” from the end[centred on the width] and an arc cut on the end via the circle cutting jig.. same same.Cut two fences same as the one of the first jig &#...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase