Mobile Worktable #5: Finishing up
The top is on and the end supports for the flip-up wing are in place… I also added a footrest (as you can see in the picture above) since the owner intends to sit at the worktable sometimes. The caster jacks gave me trouble all the way to the end – until I realized that the lift-jack simplifies and fixes everything (<<< turn your speakers up – the volume on this is pretty poor. Sorry – it was shot with my iPhone.) I edged the tabletop and flip-up wing with oak trim. The trim is mounted 1/8” proud to allow the sacrifical masonite top to sit down flush with the top edge of the trim pieces. I ran into a little “gotcha” with builder&...
