LumberJocks

DonSol's Blog

  • Advertise with us
This blog is written by DonSol | 5 entries so far

Latest Entry

Covering the bottom of a box

11-22-2016 12:42 AM by DonSol | 5 comments »

This is in response to the method Boxguy uses and described in one of his project post. I told him I would post a blog showing the method I use now. Years ago I used the same method he does but this is so much easier, less messy and quicker. So here goes and I hope he likes it. I use picture mat board that I get from the Art Center here in town. Cut a piece about 1/16” smaller than the opening. If I have an odd shape box I will cover the opening with masking tape, cut around the inside edge of the box with a sharp knife. Then place this on the mat board as a template for cutting. Then use spray adhesive to spray the back of the mat board. Place it on the b...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com