LumberJocks

Don's Favorites

  • Advertise with us
View Sinister's profile

Cutting board build blog.

1552 days ago by Sinister | 30 comments »

I recently uploaded pictures of a cutting board (http://lumberjocks.com/projects/30543) and several fellow LJs asked me to show how it was put together. Subsequently, Patron quickly deduced the process and wrote a nice blog showing the step by step process for how to achieve the pattern. I encourage anyone who is interested to take a look because he has some nice pictures outlining the process. http://lumberjocks.com/patron/blog/15074. I thought I would add a short amendment to his blog de...

Read this entry »


View BlankMan's profile

Chop Saw Dust Hood #1: Top, middle rail, and back glued in place

1691 days ago by BlankMan | 13 comments »

Well Sunday I finally got around to start building a new dust collection hood for behind my new miter saw. I had one behind my old miter saw but this new saw is wider and I had to redo the bench for it to fit thus making the old hood too small to cover the area needed. Been without one for about a year because I also picked up the Delta 12” RAS and had to redo the bench for that to fit also. So I wasn’t about to build a hood until both the RAS and miter saw were firmly mounted in ...

Read this entry »


View dewoodwork's profile

Beautiful end grain cutting boards free project plan

2422 days ago by dewoodwork | 94 comments »

Construct these beautiful end grainCutting boards Hello fellow woodworkers,In the spirit of sharing woodworking knowledge I am writing this tutorial for anyone interested in constructing these beautiful end grain cutting boards. Take a look at the photos of the four styles I have made, or create your own pattern’s and follow the steps I have outlined in this tutorial. Questions and comments are welcome, enjoy. For this board I used maple, walnut, lyptus and purpleheart. White oak, wa...

Read this entry »


View McLeanVA's profile

Cutting Board: How To's #1: Zig Zag Cutting Board - How To:

1377 days ago by McLeanVA | 50 comments »

For those of you who asked me for a tutorial on how to make the zig zag legless vegetable death table (cutting board), here is my best shot. I am far too impatient to take photos when I work, so I decided to illustrate the process using some good old Adobe PhotoShop. I hope you find this useful and informative. I will outline the process in 10 steps below. I have assumed that when viewing these steps that basic woodworking skills are familiar to you. If you have questions, or run into snag...

Read this entry »


View McLeanVA's profile

Cutting Board: How To's #2: Zig Zag Cutting Board Patterns - Inspirational

1376 days ago by McLeanVA | 22 comments »

I was absolutely overwhelmed by the positive response to my Zig Zag How To blog post yesterday, that I decided to brainstorm some possible combinations (on my lunch break) using the basic steps I outlined yesterday. All of the same techniques and steps apply, and really the only difference is the woods and measurements that make up the original “sticks.” Same rules apply to width = height. Length is up to you. Please experiment with whatever measurements and combinations strike...

Read this entry »


View poroskywood's profile

Drunken Cutting Boards #1: Drunken Alice in Wonderland Cutting Board

1767 days ago by poroskywood | 40 comments »

Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes… So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...

Read this entry »


View poroskywood's profile

Drunken Cutting Boards #2: Smooth Flowing Drunken Checker board

1756 days ago by poroskywood | 15 comments »

So having read part #1 I’ll complete the second variation of the Drunken checker board pattern. The process is basically the same except for one critical part and is as follows. Start again by taping two blanks together. This time In stead of making opposing S cuts I’ll follow the S pattern with each cut. (I get a little sloppy, but it works out OK). Follow the Part #1 procedure. CRITICAL PART! This step creates the difference between the pattern in part one ...

Read this entry »


View Mary Anne's profile

How to make a Wild 'n' Crazy two-tone board

1384 days ago by Mary Anne | 33 comments »

Sometimes the finished project looks harder to make than it really is. By request, here is a quick tutorial on making a two-tone pattern board. All you need is a bandsaw… or maybe a scroll saw. Start with two boards of contrasting woods squared and surfaced on all sides. ——Use double-sided tape to align and stack them. (carpet tape works great) ——- Cut random curvy lines through both pieces on the bandsaw. This was my first test of the Carter S...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase