Unisaw Rehab

  • Advertise with us
This blog is written by Don Broussard | 10 entries so far

Latest Entry

Unisaw Rehab #10: Reporting for Duty!

09-09-2013 07:33 PM by Don Broussard | 9 comments »

The new paint on the wings is dry and the saw is ready for reassembly (again). I installed the wings, the blade guard, fence rails and fence this morning. I did a short video of a through cut on a strip of 3/4” plywood but I’m not having any success posting it (yet). I noted in an earlier blog comment that the tip of the 10” blade, even at its lowest, it still above the top of the insert. This cut shows the height of the blade as a very small dado in 3/4” plywood. I am still waiting on the delivery of the dust door I bought. I’ll clean and repaint the dust door in the same Rustoleum Smoke Gray and update the blog once it’s installed. I al...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics