LumberJocks

Machinist Chest

  • Advertise with us
Blog series by DocK16 updated 02-01-2010 06:03 AM 2 parts 11393 reads 18 comments total

Part 1: Machinist Chest

01-28-2010 05:52 AM by DocK16 | 12 comments »

Woodsmith Magazine has challenged me again with an interesting project. This machinist chest involves numerous types of joinery including 1/8 inch tenons to hold together 3/8 inch boards to make the drawers, box joints and stub tenons and raised panels. I hope to take you along thru the cut list, assembly, and finish. Looks like an interesting project requiring exacting specifications. Here is picture of the iWoodmith Issue showing a pic of the project. All the pieces of milled 1/2 an...

Read this entry »


Part 2: Case Assembly and Drawer Installation

02-01-2010 06:03 AM by DocK16 | 6 comments »

Worked on this new project over the weekend and have to say this is alot tougher than I thought it was going to be. Tolerances are very tight. Some cuts for the drawers have to be within 1/32th or the gaps between the drawers are crooked. Thank heaven for micro adjust on the Incra router fence. Alot of do-overs on the drawers which was frustrating as I tried to cut all the drawer fronts from one piece to get a good grain match, which means if you screw up one drawer you have to redo all 7...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com