Woodworking Bench #3: Finishing andFastening the Ttop
Work on the work bench continured this weekend but slowly. The top was originally glued up in 5 sections each being planed before all were glued together. A few pics of the process.Yeah it’s real heavy top alone is close to 200 lbs and 40 board feet of lumberOkay so here’s the kicker. When gluing up the 5 sections it is done face down on the assembly table. Unfortunately when I took the clamps off and flipped it over I big Boo Boo. I had not flipped over the one plank with the dog holes for the tail vise. You will see how the dog holes don’t line up with the others for the face vise. I was about ready to run it thru the band saw and retro fit the 3 tail vise sec...
