LumberJocks

Leg Vise, Shop made

  • Advertise with us
Blog series by Jeremiah updated 281 days ago 2 parts 2387 reads 7 comments total

Part 1: How many times can you remake something?

305 days ago by Jeremiah | 0 comments »

Originally i was going to include my adventures in vise making, into my blog about my new work bench. But the farther along i got and the more mistakes i made, the more i realized it should be separated. Here was my goal:1. build a leg vise that is extremely strong and worked well.2. Not to spend a fortune (ie +$300 for the BenchCraft kind)3. Try out some new ideas – could i use regular threaded rod? – is there a better way to make the stop on the bottom part of the ...

Read this entry »


Part 2: Time to start over from scratch

281 days ago by Jeremiah | 7 comments »

Here is the leg vise i made, it works OK, but i can tell the force it puts on the mounts i made are going to fail over time. (see pic below) Then i came across this picture of an old black smith vise and wondered why hadn’t anyone one done one like this before? seemed simple, strong and fairly fool proof (ie Me Proof) So off i went to build my own:1st i turned a wheel using 2 pieces of 6/4 hard maple, laminated together.then i epoxied and pinned some 3/4” acme rod...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase